Material: High Performance Sintered Metal For high-performance bikes For 1 caliper
*There may be changes in product specifications due to the manufacturer's reasons.
* The image is only for reference. The image shown may differ from the actual product.
It forms a braking force and protective film that rises straightforwardly in proportion to the input, and is especially gentle to the disc and has high durability, the best on the street. Circuit sports driving and rainy weather racing are possible.
<> ●Safety performance unaffected by actual operating temperature range or weather conditions.(Reassurance) ●Excellent control performance, generating braking force according to the lever input.(Ease of handling) ●Develops abrasive materials according to disc diameter and speed range. Compounds are set by category, such as general rear use, scooter, etc.(Specially designed) ●Low wear and long life.(Improvement of durability) ●We also supply stock products to World Championship Superbike works teams and motorcycle manufacturers.(Proof of performance)
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Fits: HUSABERG 400 FS 02- Application Area:Front Number Required:1, HUSABERG 650 FS 02- Application Area:Front Number Required:1, KAWASAKI KLZ 1000 Versys 12-20 Place of use:Front Number of samples required:2, KAWASAKI KR250 KR-1 R 89 Use part:Front Number required:2, KAWASAKI KR250 KR-1 S 89 Use part:Front Number required:2
The OEM only lasted about 15,000 miles, but after 10,000 miles or so, it looks like 80% of it is still there aggression to the disc is unknown I think the efficacy is on par with the OEM I don't know if it's because of the Tire or if the effect is a little weak It is easy to control There doesn't seem to be any difference in efficacy, especially with temperature The price is higher, but the cost performance is higher than OEMsView Detail
Fits: BUELL XB-12 1200 R Firebolt S 04-08 Parts used:Front Necessary quantity:1, BUELL XB-12 1200 R Firebolt 04-08 Parts used:Front Necessary quantity:1, BUELL XB-12 1200 R Lightning Long 04-08 Parts used:Front Necessary quantity:1, BUELL XB-12 1200 R Lightning 04-08 Parts used:Front Necessary quantity:1, BUELL XB-12 1200 X Ulysses 06- Application Area:Front Number Required:1
I was scrounging for a brand that others don't use much, CL, which I've been interested in since my 4-wheel days BRAKES (CARBONE LORRAINE) I installed it on the ZX-10R and tried to run it down the mountain but I thought the effect was weak for a moment If you think that you hold Lever, you can feel that it only works as much as you hold it, and the most Large braking force is used before It seems to be no different from the PRO Ject & mu; that I was doing The PRO Ject & mu; is more effective in the middle position from the beginning of the grip, and if you apply it more strongly It was a fee ring that seemed to lock up, but CL BRAKES had a constant braking force against the grip It is an image that rises and goes The Release property is quite good When the initial braking is strong, I think that CL BRAKES was the right answer because there is an image where control is bad isView Detail
Fits: BUELL M2 1200 Cyclone 98- Place of use:Front Number of items required:1, BUELL S1 1200 Lightning 98- Place of use:Front Number of items required:1, BUELL S3 1200 Thunderbolt 98- Place of use:Front Number of items required:1, BUELL X1 1200 Lightning 98- Place of use:Front Number of items required:1, HONDA CB 1300 SF 98-00 Use part:Front Number required:2
I am using it on Front of BuellX 1. Pad I've been using until now is hard, or I'm going to make it work I had to grasp it.. It really does not fit your fee Ring, previously different Motorcycle When I was using Pad here, it was a good impression so let's use this time as well I bought it. After all it is good ~! Feeling that it gets so effective as to grasp it rather than being suddenly effective. It stopped properly and it was a correct answer by replacing it ~. View Detail
Fits: HONDA MSX 125 GROM 14-21 Use part:Front Number required:1, HONDA Wave 125 i (2P Caliper) 10- Location:Front Number Required:1, HONDA Wave 125 R (2P Caliper) 10- Location:Front Number Required:1, HONDA CBR125 R 04- Parts Used:Front Number Required:1, HONDA CBR 150 R Application Area:Front Number Required:1
It is an exchange from Nisshin's OEMPad. I mounted on CBR 150 and ran a sunlight Circuit. Even if the precision is good or hardly breaks in, it will work tightly. It seems that the warmer condition is somewhat better than when it is cold. It is extremely easy to control, the start of braking is also Smooth, it does not work suddenly suddenly, so I think that it is easy to handle. Even though Breaking when entering Corner, Pad croaked slightly, so I thought that Timing to release is easy to grasp. After that, although it is durability and aggressiveness to Rotor, it is not yet understood as it has just started using it. Rotor itself is burning, it will be slightly discolored than when using OEMPad. Price is also better than OEM with Sokosoko, it is easy to handle, and when you are not doing anything, there is less drag, so it is Recommendation.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!