NGK Iridium Plug CR9EIX 5448
I used it on my sub-motorcycle DR250R and decided to use it on my main XR650R because it was good. It makes a big difference on a low fire motorcycle and the engine runs better.
 |  |  |
 |  |  |
 |  |  |
A model that adopted a bikini cowl and bold graphics was added.The design of the cast wheel has also been changed.
| Displacement | 399 | Engine Type | Air-cooled/4-stroke/DOHC/4 Valve/Parallel 2-cylinder |
| Maximum Output (ps) | 44ps(32kw)/9500rpm | Maximum Torque (kgf/m) | 3.7kg・m(36.3N・m)/8000rpm |
| Vehicle Weight (Dry Weight) | 173 | Fuel Tank Capacity liter | 15.0 |
DAYTONA Motorcycle Cover SIMPLE L Size
I use it on my CB223S.The size is fine and the vehicle fits well with the Carrier.It also rained soon after I bought it, but it was Waterproof. They dried fast after the rain too!
DENSO Iridium Power Plug IU27A
I've been using this Iridium power plug ever since I switched to my previous RSV4 Factory and then RSV4 RF (2016).In the case of RSV4, NGK's Windshield IRIDIUM is not compatible, so I think Denso is the natural choice.For gasoline engine, good mixture, good compression and good spark are important, ...
DAYTONA Replace Oil Filter Cartridge Type (SUZUKI ...
Oil Filter (with Magnet) made by KIJIMA1,760 (tax included)https://www.webike.net/sd/22053072/Because I did not understand the action of Magnet of ?,145 without Magnet well. (tax included) Change to this side of theAs a result, I don't know well in use. Next time I'll try it again WITH Magnet and RE...
![BRISK Brisk ZC/ZS Plug [BR14ZC]](http://img-webike-370429.c.cdn77.org/catalogue/images/49027/d407aaa458b83354f8b16dafffb8ea48_TS.jpg)
BRISK Brisk ZC/ZS Plug [BR14ZC]
The ZC is definitely a better fit for single cylinder motorcycles than the LGS, and you can feel the grainy explosion that is typical of the Uotani Coil.
IRC HEAVY TUBE
Bought this to put inside my ix-09w 100/100-18.The weight has definitely increased, but it feels sturdy.I guess Puncture's odds are a little lower now.I wonder how the ride will be…I guess an amateur like me can't tell that much. It's going to be a fun ride through the woods again!
NGK Standard Plug CR8EK 3478
I polished it with Water-resistance Paper No.1500. Please polish it well to the inside. 。 You will get a Torque that is a kettle of fish.
NGK Moto DX Plug CR8EDX-S 91582
I used it on my 1YP2, when I used the CR7EIX the Idling became unstable and I had to use other MotorcycleIt was hard to feel the goodness than when I used it, but this Plug is also for two wheels in a stone, andI felt the change. It was a long distance driving, but the fuel consumption was improved ...
NGK Iridium Plug CR8EIX 4814
It's time to replace the Plug.I don't think there's a problem with the normal plug, but I was hoping it would lead to a slight increase in performance.It's TWIN, not Multi, so the price is higher, but I think it's still Wallet friendly.I think that the degree of difficulty changes considerably accor...
H.Craft High Power Ignition Coil 3Ω Dual Lead
Replacement from DYNACoil.It works fine, but the High-Tension Cord (Plug Cord) Press-in work is required forIt might be hard if you can't do Crimp or press fit, but some people break Bracket or Body, so you might as well just ask a Motorcycle shop to put the code in.There is no handling instruction ...
(4.0)
?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING