I exchanged the sprocket when I changed the chain. The original one was 41T, but I increased it to 45T because I wanted it to make it shorter. I downsized the front sprocket from 16T to 15T too, so it became really short and the meter went out of tune. It seems that I pushed it too hard.
But still I like its color!
- Sale
64.69 ~ USD (9,598 JPY) 74.14 USD Save 13%
Delivery Information
-
Please select product form first.
FITMENT
-
CBR600F4
04-06
-
CBR600F4i
01-03
-
CBR600F Sports
01-06
-
CBR1000RR
17-19
See all
HONDA
Product detail
-
Sprocket use Rear
-
Applicable chain size 525
-
Sprocket material Ultra duralumin (A7075) material (hard alumite finish)
-
Number of rear sprocket teeth 40
-
Sprocket color champagne gold
■For rear
■Compatible chain sizes: 525
[Material] Ultra duralumin (A7075) material (hard anodized finish)
[Color] Champagne gold color
[Weight] Approx. 1/3 of steel (stock) etc.
[Specifications] Durability: 10000 to 20000km (*)
**The stock size chain cannot be used on vehicles that are set up for conversion, and must be converted to the correct chain size.
*The color and shape of the delivered product may differ from the picture.
*If you change the number of sprockets from the stock, it may not be able to be installed on some models.
*Durability is for reference only.It depends on your riding style, chain size and maintenance condition.
*Offset figures are for sprockets only.
*The actual offset of the chainline from the stock value will vary from model to model.Please note that if the stock sprocket has an offset, that value will be subtracted.(It depends on each model)
*Not all of the available tooth numbers can be installed without interference to the vehicle body.Please confirm the installation of each vehicle body according to the number of teeth by yourself.
*There may be changes in product specifications due to the manufacturer's reasons..
* The image is only for reference. The image shown may differ from the actual product.
Ultra duralumin (A7075) is used as the material, and after hardening and heat treatment T6, it is machined one by one.In addition, the surface is treated with a special hard film (hard alumite), and boasts superior hardness and durability compared to ordinary alumite products.In addition, it contributes greatly to the weight reduction under the spring by the bold cutting process while securing sufficient strength.Moreover, the natural coloration of the hard material during processing does not fade.
Sprocket Course - Basics - Frequent maintenance is the secret to riding your bike for a long time!SUNSTAR
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.