- Fits:
- KAWASAKI W650
I love the product and how the valve cover now matches with the carburetors.
Installation was easy and there were no problems with itRead More - Fits:
- KAWASAKI W400
- KAWASAKI W650
Made from nice and solid steel, pleasant to the touch.
For my purposes and my lamp it turned out to be too short. The headlight was flush with the fork legs.
If it were Z-shaped and 5 cm longer, it wo...Read More - Fits:
- KAWASAKI W650
- KAWASAKI W400
They are made from composite material and lighter than the stock ones
Thinner and more elegance, especially with sr400 gas tank.
You need to remove air box and to relocate all electric parts from lef...Read More - Fits:
- KAWASAKI W400
- KAWASAKI W650
- KAWASAKI W800
ultimate offer if you need to rebuild your wheel
shine and solid spokes, inner and outer spokes are separated
polishing friendlyRead More - Fits:
- HARLEY-DAVIDSON XL1200L SPORTSTER LOW 05
- HARLEY-DAVIDSON XL1200R 04
- HARLEY-DAVIDSON XL1200R 04
- HARLEY-DAVIDSON XL1200R 04
- HARLEY-DAVIDSON XL1200R 04
- ...and more.
nice and solid bracket for mounting side bags on my harley davidson 1200
no problems with installation even with non stock shocksRead More - installed this brembo on w650, because stock ones are not quite good for me.
it's not bolt-on for w650, you need to customize bracket and wheel space bushings. also you need to improve the main cylind...Read More - bought it as a tuning for w650 but with different front wheel
mount holes as it should be
installation as any other caliper
aslo you need to improve the main brake cylinderRead More - Fits:
- HONDA XR400 Motard (MOTARD) ND08 [stock number]16163-KPK-901 [model name]XR4008 [type]J
- HONDA XR400 Motard (MOTARD) ND08 [Genuine part number]16163-KPK-901 [Model name]XR4005/XR4007 [Type]J/2J
- HONDA XR250 Motard (MOTARD) MD30 [stock number]16163-KPK-901 [model name]XR2506/XR2507 [type]2J/5J
- HONDA XR250 Motard (MOTARD) MD30 [stock number]16163-KPK-901 [model name]XR2503 [type]2J/2J/A/2J/B/2J/C/2J/D/5J/5J/A/5J/B/5J/C
- HONDA XR250 Motard MD30 [stock number]16163-KPK-901 [model name]XR2505 [type]2J/5J/YA
- ...and more.
Good carb float chamber seal. Flexible rubber.
I had no problems with installation.
Suits as well as OEM seal.
No fuel leaks after installation.Read More - Fits:
- KAWASAKI W650
- KAWASAKI W400
- KAWASAKI W800
This lock has a liltle bit different design, than the OEM, but works well.
Mount holes and locking mechanism are the same.Read More - Fits:
- KAWASAKI Zr-7. ZR750F [stock number]13236-1221 [model name]ZR750-F1
- KAWASAKI ZRX1200S For Malaysia Market ZRT20A [stock number]13236-1221 [model name]ZR1200-B1/ZR1200-B2
- KAWASAKI ZRX1200S ZRT20A [stock number]13236-1221 [model name]ZR1200-B1/ZR1200-B2/ZR1200-B3
- YAMAHA XJR400S 4HM [stock number]3FV-83922-01 [model]XJR400/XJR400S [type]4HM1/4HM2
- YAMAHA XJR400RII 4HM [stock number]3FV-83922-01/3TJ-83922-01 [model]XJR400R/XJR400RII [type]4HM3/4HM5/4HM6
- ...and more.
Good quality lever. I suppose it's even better than stock one.
There are not so many adjustment levels, but enought for me.Read More - Fits:
- KAWASAKI W650 99-08 EJ650A (150mm longer than Uphan model)
They are better than stock, because of this multylayer sleeve.
But on the other hand it's difficult to lubricate them.
Ant they are long. For very high handlebar.
Too long for my classic medium size h...Read More - Fits:
- KAWASAKI W650 99-08 EJ650A (150mm longer than up-hang model)
this is a nice cable if you want to swap your low handlebar to a high one.
But my handlebar has a classic medium size, so this cable is too long for me, so i needed to install it in a differrent way (...Read More - Fits:
- KAWASAKI VULCAN900Custom 07-16 VN900B
- KAWASAKI VULCAN900Custom 07-16 VN900B (VN900B)
- KAWASAKI NINJA2 Helmet50RR 08-12 EX250K
- KAWASAKI ESTRELLA CUSTOM -06
- KAWASAKI NINJA250R 13-16 EX250L
- ...and more.
Cables and connectors are fine. Work excelent.
Clamps are included, so it's easy to install.
These cables are for swapping handlebar from low to very high, so if you'd like to install classic medium s...Read More - Grip Wrap-around Replacement Type Grip Heater GH10, Built-In Switch on Clutch Side, Grip Length 130mmBy KIJIMAFits:
- KAWASAKI ER-6n 09-10
- KAWASAKI ER-5 99-02
- KAWASAKI 250TR 11-13 (Models:BJ250-F1
- F2
- F3
- ...and more.
+: Compact, without external switch; functionality; reliability
-: grips design; friction in mounted throttle - when you give more gas it doesn't return.Read More - Fits:
- KAWASAKI W650
- KAWASAKI W400
Well-looking exhaust with nice (but not loud) sound.
There is just one heat shield for rider, and nothing for passenger.
I know they are exist, but i had not found the way how to order them additional...Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING