I first had this installed on my Honda Monkey 125 but then upgraded the speedo to the Super DN. I figured I might as well install it on my CT110! You only need to drill a additional hole in the mounting bracket to get this to work. really enjoy having a tacho and temp on my CT110 but the vibrations from the bike do cause the needle to jump around a bit under hard acceleration.
View Detail150.2 USD (22,314 JPY)
Delivery Information
This item is discontinued.
Product detail
[Material]
Body: Stainless steel
Meter bracket: Steel with black paint finish
[Component]
・Meter Bracket
・Sub-harnesses for each model
・Rubber mount type bracket
Body size: Φ48mm
Screw size: M4 x 18mm
Mounting Pitch :37mm
Guideline type electric tachometer: -12500rpm display
**Please do not install any aftermarket H.I.D kit or any other company's LED headlights or fog lamps at the same time.Some ballasts / inverters (voltage converters) emit high-voltage noise that may adversely affect digital circuits, causing product failure or malfunction.
*Not completely waterproof due to the moisture vent holes.A hole is provided on the back of the main unit to drain moisture generated by changes in internal temperature due to operation.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change..
The "Φ48 Small DN Tachometer Kit 12500RPM" can be installed next to the standard meter without any wiring modification
■Details
This product comes with a meter bracket that can be placed next to the stock speedometer and a sub-harness specially designed for the vehicle, so that the small DN tachometer 12500RPM can be installed on the Monkey 125 without the need to modify the stock parts or wiring.
The wiring can be connected by coupler.
■Φ48 small DN tachometer DN=digital needle
The angle of the pointer is completely controlled by a digital signal & small motor, which provides high reliability and high holding power of the pointer.
In addition to the RPM function, the meter is equipped with a thermometer, a clock, an engine work timer, and an automatic measurement function (maximum temperature record / maximum RPM record).
The black panel with white LED lighting provides excellent nighttime visibility.
■Φ48 Small DN Tachometer Details
・The monitor is equipped with a variety of functions (digital display)
A thermometer (capable of measuring up to 150°C) and a stick temperature sensor are included, so you can measure the temperature at the drain bolt by purchasing SP Takegawa drain bolts (sold separately).
The temperature sensor can be mounted inside the cowl to measure the outside air temperature.
・Automatic measurement function
The maximum temperature record and the maximum rpm record are done automatically when the meter is installed.
After running, you can check the record by switching the meter display, and the record will be saved until resetting.
・Engine work timer
Timer that automatically adds up the engine operating time above 500rpm.
It stops when the speed drops below 500rpm.
Maximum time: 9999 hours (up to 100 hours is recorded in minutes, and over 100 hours is recorded in hours.) Resettable.There is a non-display setting
・Clock
24-hour display with hide setting
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.