- Fits:
- HONDA MONKEY125
Top bridge kit is of high quality but you need a thicker steering stem washer as steering stem nut bottoms out when tightened, the Over Racing top bridge in thinner than std bridge, Over Racing needs ...Read More - Fits:
- HONDA MONKEY125
Very nice pipe. Quiet at idle/low revs but has a nice bark as the revs pick up. Biggest diameter header for a monkey high mount exhaust. The quality of all the finishes, mountings and heat shields is ...Read More - Fits:
- DUCATI PANIGALE V4
- DUCATI PANIGALE V4 S
It turned out that for the left slider on my V4S (with DP carbon alternator cover) rather than shorten the middle spacer it is necessary to lengthen the two outside mounts by adding additional spacers...Read More - TOP QUALITY TAKEGAWA EQUIPMENT...
I always buy from Webike Japan..
Never had a single problem..
And I dont think I ever will..Read More - Fits:
- DUCATI PANIGALE V4
- DUCATI PANIGALE V4 S
Beautiful product, complements my V4S. One problem, though, I have the Ducati Performance carbon engine covers. The middle bolt on the left side Aella engine slider uses the same bolt hole as the carb...Read More - Fits:
- HONDA MONKEY125 18-20 JB02
It took me a long time to decide on which fender eliminator to get for the Monkey and I am very happy I went with the one from Hurricane. comes with a nice small LED light and has mounts to secure the...Read More - Fits:
- HONDA CBR 1000 RR 17-20 SP1
- HONDA CBR 1000 RR 17-20
- YAMAHA YZF-R6 17-20
- YAMAHA YZF-R6 08-16
- YAMAHA YZF-R1 04-06
- ...and more.
These calipers are the premier Brembo streetbike option . Brembo 2 piece bridged billet calipers are precision designed and constructed . Flawless CNC machining ensures perfect mating surfaces , provi...Read More - Fits:
- KAWASAKI ZX-14R 12-
With this fender , A-Tech have faithfully replicated Kawasaki's striking Aero guard , so importantly , maintaining that legendary ZX14R top speed stability . But even better , have shed significant gr...Read More - Fits:
- HONDA Grom MSX125
Beautiful part from G-Craft. In combination with my solid shifter linkage has transformed the gear changes on my Monkey. Couldn't be happier with the product from G-Craft and support from Webike.Read More - Fits:
- HONDA glom (JC61-1000001-1299999)
- HONDA MSX125 SF
- HONDA MSX125 (MLHJC618_D50000001-)
- HONDA MONKEY125
- HONDA glom (JC75-1000001-)
- ...and more.
High precision engineering in a quality product. Kit contains everything needed for easy installation. Immediate performance gains by this kit. NOTE - need to run high octane fuel due to increased com...Read More - Fits:
- HONDA CB1000R (2018-) -20 * fits 18-19 models
Very happy with the purchase. Super built quality, it fits perfectly. Fast delivery, from Japan to Australia in just 3 days. Thx guys.Read More - Fits:
- HONDA CB1000R (2018-) -20 * fits 18-19 models
Very happy with the product. It fits really well. Good price and extremely fast delivery (from Japan to Australia in just 4 days). Thx guys.Read More - Fits:
- HONDA CBR650R 19-20 (RH03-1000001-)
- HONDA CB650R 19-20 (RH03-1000001-)
Delivery took time but the item was plug and play easy to install.
The item was well packed and arrived undamaged. I would recommend this website and would do business with them again.
Thanks.Read More - Fits:
- HONDA MONKEY125 (JB02-1000001-)
- HONDA glom (JC75-1000001-)
- HONDA glom (JC61-1300001-)
- HONDA glom (JC61-1000001-1299999)
- HONDA MSX125SF
- ...and more.
Really high quality big bore setup with loads of bottom/mid range power. Totally changes the bike and makes it so fun to ride. I only gave 4 stars because English instructions are not available.Read More - Fits:
- HONDA MONKEY125 JB02-1000001-
- HONDA MSX125SF
- HONDA MSX125
- HONDA GROM JC75-1000001-
- HONDA GROM JC61-1300001-
- ...and more.
I bought this crank to use with the Takegawa 4V+R 181 big bore kit. Its much thicker and more solid than the stock crank. So far its been really good, even at 11500rpm. Highly recommended.Read More - Fits:
- HONDA Grom From JC75-1000001
- HONDA Grom From JC61-1300001
- HONDA MSX125SF
- HONDA MONKEY125 (JB02-1000001-)
Adds peace of mind when you're running a high revving big bore motor. Easy fitment on my monkey 125 with the takegawa heavy duty crankRead More - Fits:
- HONDA Grom From JC75-1000001
- HONDA Grom From JC61-1300001
- HONDA MSX125SF
- HONDA MONKEY125 (JB02-1000001-)
Adds peace of mind when you're running a high revving big bore motor. Easy fitment on my monkey 125 with the takegawa heavy duty crankRead More - Fits:
- HONDA LEAD125 (JF45)
- HONDA glom (JC61/JC75)
- HONDA MONKEY125 (JB02)
- HONDA PCX150 (KF12/KF18/KF30)
- HONDA PCX125Hybrid (JF84/JF81/JF56/JF28-1100001-)
- ...and more.
It's cheap, easy to install and means there's one less sensor to go wrong. May as well add one to your order when you're buying partsRead More - I purchased these Yoshimura sppols for my Gsxr 1100K,they are good quality,clearance could be tighter between the sleeve and spool(they spin freely) hopefully dont rattle,,the item received is a flat ...Read More
- Fits:
- SUZUKI ST250 09- NJ4CA FI
Very well thought, easy installation, looks sturdy.
As it is made for the TU250X it fits very well and looks great.
Happy with the product.
Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING