I used the ThailandHondaH2C Windscreen that I replaced immediately after purchasing my new car for 2 years, and because the body mounting part was damaged by over-tightening, I was satisfied with the design, but I felt dissatisfied with the shield effect, so I purchased this OEM Body Mount Shield. I purchased this OEM Body Mount Shield and replaced it.
The OEM Body Mount Shield is thick and does not get scratched by the cover etc. The mounting bracket is also very sturdy and does not get shaken by vibration. The mounting bracket is also very sturdy.
The good Point of Body Mount Shield mentioned above was the disadvantage of Windscreen when I turned it over, but I am satisfied with the replacement because everything has been solved.
The instruction manual is not included and can be downloaded from the website. You can also check the installation video on YouTube etc. and image the Nut insertion in advance.
170.3 USD (25,300 JPY)
Delivery Information
This item is discontinued.
Product detail
Manufacturer's Part Number: 08R70-K96-J00
Shield Color:Clear
Size: Height 655 x Width 466 x Thickness 4.0mm
Material: polycarbonate
Installation time:0.4h
It greatly improves the wind protection effect for the rider when riding.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:HONDA PCX150 18-20, HONDA PCX HYBRID 18, HONDA PCX125 18
Jun 29, 2021
Replacement of H2CWindscreen to OEM on JF81
Fits:HONDA PCX150 18-20, HONDA PCX HYBRID 18, HONDA PCX125 18
Jun 7, 2021
New car installation on PCX125 JF81
I installed it at Dealer before delivery of my new PCX.
There was a post here and there that Mirror and Screen interfere with each other, but still, Mirror and Screen seem to interfere with each other, so Dealer changed the position of Mirror and installed Long Screen.
I have a Mirror Clamp on the Pipe handle and a Mirror on it.
There is a large difference between having a screen and not having a screen.
Especially in winter, the chest becomes very cold without Screen.
It also provides protection from wind, rain and insects.
I think it would be better if it was a bit longer.
Since it is an OEMOption, it is well made.
If you use it for commuting, it is better to have it.
Fits:HONDA PCX150 18-20, HONDA PCX HYBRID 18, HONDA PCX125 18
Oct 17, 2019
i payed taxes in Receita Federal Brasileira when arrives in my country. The windshield is very good, easy to install and my PCX is look like way bigger than it is
View DetailFits:HONDA PCX150 18-20, HONDA PCX HYBRID 18, HONDA PCX125 18
Jun 11, 2018
The essential windshield effect ? ? ? ? ?
PCX 150 of the previous type (KF18) I was on the OEM Long Shield, so I will compare it with that.
I installed it by myself without asking Shop etc..
First from the conclusion OEMShield for this New Model KF 30 was lower than the previous KF 18.
Shield's vertical length is also a few centimeters shorter, but with the Plus it's slightly ahead of the angle but the height is even lower.
Regarding the windshield performance, it is the same that the wind does not hit the body, but it has come to be hit hard by the face as well.
Large It is too bad Shield is too bad, so if you say good or bad for SMART for this New Model SMART is OK, but I feel windshield performance is inferior to the previous one.
As the New Model KF30 itself is getting more driving stability than the previous KF 18 and the 100 km cruising is comfortable as well, if the windshield performance is high with this, the speed will become much easier so it is a little disappointing.
When OEMLongShield is attached, since Mirror hits the Shield when the Handlebar is turned off, parts that change the installation position of Mirror are attached, but in the case of my case Limit interference did not occur even in the original position.
New Custom Articles
