It is for YZF-R25, but it can be installed on MT-03 without modification
However, there is no manufacturer's guarantee of conformance
I bought these because I have them on my MT-09 ToRacer, so I knew they were good
Best of all, the range of adjustments is the best
Even if you're a slow runner, you'll notice the difference as soon as you start running
It could have been OHLINS, but it didn't have a hydraulic Preload Adjuster setting So I chose this product, even though it is a bit expensive
1,265.67 ~ USD (187,796 JPY)
Webike Point: +1878~ pt
(12.65 USD)
Delivery Information
-
Please select product form first.
Product detail
Mono Shock NTR R3 Series
Reservoir Tank Shape: Hose Type
Shock Shape: M5
Special reservoir bracket included
**Due to a change in the product specifications, the image includes the product image of the old specifications.The current specification is that the gold part of the anodized part of the old product is changed to Titanium color and the blue part is changed to black.
*Images are for reference only.Actual specifications and vehicles may differ.
*When hydraulic preload adjuster is installed, ride height adjuster is not included.
*We do not accept returns or exchanges on made-to-order items.
*The image may include other colorings.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed..
* This product will be made after an order, We will notice currect shipping time after we recieve an order.
* This item can not be cancelled, returned nor exchange after placing an order.
[From the street to the track, it's a high-level response to every scene]
2 way for compression (slow and fast) and 1 way for rebound.
It also comes standard with a 3-way damper adjustment system.
The 2-way compression adjuster provides both traction at low speeds where the load is hard to apply and stability at high speeds where a heavy load is applied, meeting the detailed demands of riders of all applications and levels, from street to race use.
In addition, these 3-way adjusters are Nitron's original system and are completely independent from other adjuster areas, allowing for a wide range of precise adjustments.
Ride height adjusters are also standard on all models.(*Except for some models)
Nitron's top-of-the-line model is fully equipped with dampers, springs, ride height and all the necessary adjustment systems for shocks.
*Spring seat color is silver
■NITRON JAPAN also offers suspension maintenance (overhaul).
For details, please visit the NITRON JAPAN official website.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:YAMAHA YZF-R25 15-18
Aug 19, 2019
Helpful?
Fits:KAWASAKI ZZR600 93-07 E1-E10, KAWASAKI ZZR400 93-07
Apr 12, 2022
NITRONR3 (ZZr-400N type, 1997)
As you can see in the attached image, the Body is sent with the Setting already done.
I, weighing 55?, had the impression that it was a little stiffer than the NORMAL, but I had no complaints about the Corner being hard to bend, etc.
The settings were ideal for the ride after the Rebound adjuster was loosened two steps from the default setting.
There is no bounce etc. when accelerating at the exit of Corner.
Helpful?
Feb 16, 2022
Flexibility on rough roads, and a sense of sturdiness and ground contact on corners.
I am very satisfied with this product.
Helpful?
Fits:SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA) 99-07
Dec 8, 2021
Installed on Initial ModelGSX1300R HAYABUSA
The installation was a few years ago, but now it is Review.
The motivation for the introduction was to refresh the rear suspension of the GSX1300R HAYABUSA, which has one foot in the old car.
Although I don't have the sensitivity to feel the movement, I was concerned about the visually decayed bump rubber and asked a suspension specialist to OH the OEM suspension.
As a result, I got the death sentence that there is an Oil leak but no parts to Overhaul.
So I bought this product.
It doesn't have the flamboyance of Gold PicaOHLINS, but it does have a good sense of sophistication that Turquoise blue gives off.
Also, even though it's Made-to-Order, I think it's great that they have the heart to offer a new one for a vehicle that's almost 20 years old.
To be honest, I don't know about the ground feeling while driving because we are known for our insensitivity, but I felt a difference in the sinkage the moment I sat down.
However, it may be a terrible story because the object of comparison is a 20-year-old player who leaked Oil.
The replacement process is not that difficult.
To remove the suspension, you need to be prepared to support the Frame with a horse, but I think Level is manageable if you have that.
In the case of GSX1300R HAYABUSA, if you pull out the suspension from the bottom, it will become the hole of Swing Arm and the ring of wisdom, so if you remove the hinge of Fuel Tank and pull out from the top, you can work smoothly.
I think this is the best option to refresh the rear suspension of Initial Model GSX1300R HAYABUSA at this time.
Helpful?
Apr 30, 2021
It is a replacement from an integrated model.
Material for fixing a separate Tank to the Frame.:It comes with a RubberSpacer and a Band made of the genus Gold. There is no instruction manual to tell you where to install the suspension body, but after you install the suspension body, you can fix the tank as far as you can reach. In my case, I made a long hole in the Bracket welded to the Frame, and I was able to fix it through the Band of Gold there. The compression and rebound are adjustable, so it's easier to use traction.
Helpful?
New Custom Articles
