When I made the 14T conversion, I thought
For driving on flat ground, no problem
Slightly less vibration, Low GEAR and Second GEAR
I had the impression that the range of uses was wider than ever before
However, it's not enough to drive on mountain roads in good spirits
Frequent gear changes are required and
You can run a little bit of a climb without losing GEAR
The goodness will be gone
I ended up going back to 13 guns
It's good for commuting to work and such
To be used as a toy
There were times when it was a bit lacking
- Sale
- Instock
25.52 USD (3,787 JPY) 31.68 USD Save 19%
Webike Point: +38 pt
(0.25 USD)
Delivery Information
-
Please select product form first.
FITMENT
HONDA
Open Fit Model Information Table
-
XR250R
86-95
-
SL230
97-98
-
FTR250
86-89
-
FTR223
00-13
See all
HONDA
Product detail
-
Sprocket use Front
-
Applicable chain size 520
-
Sprocket material Chromium molybdenum steel (iron tetroxide coating)
-
Number of front sprocket teeth 14
-
Sprocket color black
■For front
■Compatible chain sizes: 520
[Material]
Chromium molybdenum steel (iron tetroxide coating finish)
[Color]
Black
[Specification]
Heat treatment: carburizing and nitriding treatment
Durability: 10000 to 30000km (*)
**The stock size chain cannot be used on vehicles that are set up for conversion, and must be converted to the correct chain size.
*The color and shape of the delivered product may differ from the picture.
*If you change the number of sprockets from the stock, it may not be able to be installed on some models.
*Durability is for reference only.It depends on your riding style, chain size and maintenance condition.
*Offset figures are for sprockets only.
*The actual offset of the chainline from the stock value will vary from model to model.Please note that if the stock sprocket has an offset, that value will be subtracted.(It depends on each model)
*Not all of the available tooth numbers can be installed without interference to the vehicle body.Please confirm the installation of each vehicle body according to the number of teeth by yourself.
*Not all sprockets have lightweight holes.
*There may be changes in product specifications due to the manufacturer's reasons..
* The image is only for reference. The image shown may differ from the actual product.
The synergistic effect of high hardness by high level quenching and anti-corrosive treatment that does not deteriorate the material boasts excellent durability.When carburizing and nitriding heat treatment is applied to steel materials, it is very difficult to maintain high-precision dimensions because of the different expansion and contraction rates.Sunstar applies a special heat treatment process using its own facilities and technology.
Sprocket Course - Basics - Frequent maintenance is the secret to riding your bike for a long time!SUNSTAR
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
- ALL
- Japan (327)
- Singapore (8)
- China (4)
- Australia (3)
- Hong Kong (3)
- Malaysia (3)
- Russia (3)
- Sri Lanka (2)
- United Kingdom (2)
- Belarus (1)
- India (1)
- South Korea (1)
- Macau (1)
- Netherlands (1)
- New Zealand (1)
- Philippines (1)
- Taiwan (1)
- Thailand (1)
- United States (1)
- Vietnam (1)
Fits:HONDA CB223S 08-13, HONDA FTR223 00-13, HONDA FTR250 86-89, HONDA SL230 97-98, HONDA SL230 99-04
Mar 24, 2020
The result of making it 14 trillion instead of 13
Helpful?
Fits:HONDA CB223S 08-13, HONDA FTR223 00-13, HONDA FTR250 86-89, HONDA SL230 97-98, HONDA SL230 99-04
May 20, 2016
Contrary to the exchange of FT 223 classic 13T to 14T, I tried to 12T. Commuting, because there are a lot of street rides, it is becoming easy to ride considerably privately. It is not a Motorcycle for Speed ??so it is quite recommended to 12T privately. You can keep Chain as it is.
It is good..
Helpful?
Fits:HONDA CB223S 08-13, HONDA FTR223 00-13, HONDA FTR250 86-89, HONDA SL230 97-98, HONDA SL230 99-04
Dec 26, 2015
When I put out 100 kilometers with Tokatoko FTR, it is quite difficult to kill me ...
It became a little easier to replace this product.
As for the low speed as it is, the high speed becomes a little easier.
I never put out Speed ??so much, but sometimes I ride at high speed, so I bought this product.
It is buying!
Helpful?
Fits:HONDA CB223S 08-13, HONDA FTR223 00-13, HONDA FTR250 86-89, HONDA SL230 97-98, HONDA SL230 99-04
Jun 27, 2013
[Webike Monitor]
Driven Sprocket and simultaneous exchange.
appearance has a product of the other company, and no great difference.
The other company does not have a structure like the Guide which exists pure, either, and necessity is a question.
exchange is also easy and it starts to use it satisfactorily at all.Place [ it cannot estimate that
durability is not used ] ...
Helpful?
Fits:KAWASAKI ER-4n 11-13, KAWASAKI ER-6f 07-10, KAWASAKI ER-6f 09, KAWASAKI ER-6n 06-14, KAWASAKI ER-6n 09
Installed on: KAWASAKI W650
Apr 1, 2025
I converted 525 set to 520 and increased the ratio for my offroad racing w650It weights 136 gramsthe stock ones is 195 grams
View Detail
Helpful?
New Custom Articles
