As used in the title, I used it for 420 Size Conversion of RZ50.
I think that it was a good Modify because 428 Size has almost no freedom of teeth.
48.65 ~ USD (7,219 JPY) 57.29 USD Save 15%
Webike Point: +72~ pt
(0.48 USD)
Delivery Information
-
Please select product form first.
FITMENT
YAMAHA
Open Fit Model Information Table
-
YSR80
86- [Stock chain size]420 [Stock number of links] 98L [Stock number of fingers] 37
-
CHAPPY
75-79 [Genuine chain size] 420 [Genuine linkage number] 94L [Genuine number of fingers] 32
-
RX50
[Stock chain size] 420 [Number of stock links] 110L
-
YSR50
86- [Stock chain size]420 [Stock linkage number] 100L [Stock clue] 44
See all
YAMAHA
Product detail
-
Sprocket use Rear
-
Applicable chain size 420
-
Number of rear sprocket teeth 48
Chain size: 420
**The actual product may differ from the shape in the image..
* The image is only for reference. The image shown may differ from the actual product.
●THAMT treatment (Teflon / Hard anodized / Molybdenum treatment process)
Hard hard anodized + molybdenum disulfide + Teflon (surface)
A hard anodized aluminum coating alone may cause seizure if used in areas where contact surface pressure, fine vibration, or friction occurs.
This hard anodized aluminum has a self-lubricating function and has succeeded in improving the wear resistance of sprockets.
●Lubricity and wear resistance
Molybdenum disulfide soaked into the entire micropores of anodized aluminum by electrolytic dissolution greatly reduces the frictional resistance of the hard film.
Lubricating properties for use in sliding parts without lubrication.
●Durability
Durability is several times higher than that of standard hard anodized aluminum in friction tests.
●High hardness
About 130%-150% improvement compared with standard anodized aluminum.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:YAMAHA CHAPPY 82-86 [OE chain size]420 [OE linkage number]94L [OE clue]32, YAMAHA CHAPPY 80-81 [Genuine chain size]420 [Genuine number of links]94L [Genuine number of fingers]30, YAMAHA CHAPPY 75-79 [Genuine chain size] 420 [Genuine linkage number] 94L [Genuine number of fingers] 32, YAMAHA YSR80 86- [Stock chain size]420 [Stock number of links] 98L [Stock number of fingers] 37, YAMAHA YSR50 86- [Stock chain size]420 [Stock linkage number] 100L [Stock clue] 44
Jul 21, 2016
Helpful?
Fits:HONDA GROM125 , HONDA MSX125
Installed on: HONDA Monkey 125
Oct 30, 2023
The brown color is very luxurious.It weighs one-third compared to the existing standby gear.It's quite light, so I'm a bit worried about its durability, but I'm satisfied.
View DetailHelpful?
Fits:YAMAHA DT230 LANZA (DT230) 97- 520 conversion [Stock chain size] 520 [Stock linkage] 106L [Stock number of links] 106L [Stock clue] 45, YAMAHA YFS200 BLASTER 88-01 [OE chain size]520 [OE linkage count]92L [OE number of links]40, YAMAHA TT600 94-03 R [Stock chain size]520 [Stock linkage number]110L [Stock clue] 44, YAMAHA TT250R 93- [Genuine chain size]520 [Number of genuine links]106L [Genuine number of fingers]44, YAMAHA TT250R RAID 93- 520 conversion [Stock chain size]520 [Stock linkage] 106L [Stock number of links] 44
Sep 29, 2022
I installed this product on my YAMAHA DT200WR 92. Because the DT200WR has slightly less displacement than other dual-purpose bikes of this age, I chose the 45T (OEM: 42) for acceleration. As expected, we got good acceleration. The durability of this product will not be as good as OEM parts, but it will look racy and help reduce unsprung weight.
View Detail
Helpful?
May 8, 2022
Purchased Front 16T and Rear 37T to make it slightly lower geared.
Steel at 37T would be reasonably heavy, so I was excited to go with DuraluminSprocket.
Gold "Classic" But it would have been nice if Fashion (Lol) I chose the Premium one because of the 20x Point reduction. I will leave the durability to other people's impressions.
I don't know if it was because of the rare 37T tooth count or because I asked for it during the hectic end-of-year period. I don't know if it's because of the number of teeth, or because I asked for it during the hectic end of the year season.
Delivery time took about 3 weeks. (Initially, about 1 month)
If you need it to attend Races and Events, you will need to order it well in advance.
So, when installing, Habit, or rather, Sprocket of XAM is (I've only used it for HONDA's SmallEngine Displacement Volume.)
The hole size for the hub center and hub bolt may be a little too large, so if you install them properly, the drive chain may not be able to fit in the hub center.
It would be better to be careful because it would be as if you are stretching one side.
I wish they would make it a little more Tight.
Helpful?
Feb 27, 2022
I installed it on my SEA BASSGAG. Light weight and good quality. I don't know how effective it is.
View DetailHelpful?
New Custom Articles
