- Fits:
- HONDA MONKEY125
I bought it after seeing a review that it fits neatly. Of course, I bought it because it is black. The front and rear look different and must be installed with care. Read More - Fits:
- YAMAHA CYGNUS X-SR (SEA5J)BF91/93
- (SED8J)BF92/94 (for front)
- HONDA glom All JC61/JC75/JC92 models (for front)
- HONDA MONKEY125 All JB02/JB03 models (for front)
- HONDA DAX125 All JB04 models (for front)
- ...and more.
It is good to be lighter than genuine products, but the reason why I bought it is because of the black color.
Genuine axle shafts look too cheap in cast iron color. Read More - Fits:
- HONDA DAX125 JB04 (JB04-1000001 or later)
- Others This is for fixing the brake and clutch master cylinder holder or clutch lever holder.
The price is a little more expensive than other brands' holders, but I chose it because it looks a little different.
It feels solid. Read More - Fits:
- HONDA MONKEY125 (JB02-1000001-)
- Others Universal
The cheap-looking part of genuine parts can be changed a little more luxurious. It's a bit expensive, but it's perfect for color!Read More - Fits:
- HONDA MONKEY125 All JB02 models/All JB03 models
- HONDA glom All JC61 models/All JC75 models/All JC92 models
There's a little bit of residual vibration, but the handling is more direct!
There is quite a difference before and after the change. I'm satisfied.Read More - Fits:
- HONDA MONKEY125 19-21
Slider fitment can make the front lower part look more solid and fuller.
insurance that will protect against unexpected damage. Read More - Fits:
- HONDA MONKEY125 JB03 All models
- HONDA MONKEY125 JB02 All models
It is perfect when you want to make changes while maintaining a genuine look.
It feels wider and flat than before.And feeling of the seat height being lowered is less.
I was going to do seat moldin...Read More - Fits:
- その他 Universal
I ordered it because I thought I would need it while changing the spark plug cable, but the coil and cable were separated and it became useless.Read More - Fits:
- HONDA PCX150 12-20 KF12/18 12.6-18.4 [Displacement] 150 [Required units] 1
- HONDA PCX 10-18 JF28/56 Thailand production 10.3-18.4 【Displacement】125 【Number of units required】1
- HONDA CBF125 08- Displacement】125 【Number of units required】1
- HONDA CB125F 15- JC64 Instructional vehicle 15.12- [Engine displacement] 125 [Required number of units] 1
- YAMAHA Grand Majesty 400 05-08 5RU9
- ...and more.
It may be because it is replaced with a plug cable, but it feels soft.
The dx version is more expensive than the basic plug, and I think there will be an advantage.Read More - Fits:
- KAWASAKI KLX150BF 16
- KAWASAKI D-TRACKER125 10-16
- KAWASAKI KLX125 10-16
- YAMAHA XTZ125 03-12
- YAMAHA WR155R 20
- ...and more.
The lever has a good finish.
It's easy to wrap around your hands and has a good grip. Last product for handle setting under the zeta brand
Additional Clutch lever installed in 4 fingers.Read More - Fits:
- HONDA CRF150L 18 [Lever type]K
The lever has a good finish.
It's easy to wrap around your hands and has a good grip. Last product for handle setting under the zeta brandRead More - The sound size of the horn with a weak presence can be greatly increased. The basic horn sounds is weakly low. So Essential tuning for my safety.Read More
- Fits:
- HONDA
It is possible to change the horn visible from the front so that it is not visible to the desired position.
It's nice to be able to work neatly with jack by jack. Read More - Fits:
- HONDA MONKEY125 19-22
- HONDA MONKEY125 19-22 (ABS)
There are some swage products that are more expensive, but I bought them because the quality of ac products is excellent compared to the price.
You can also choose a color that suits your taste. It do...Read More - Fits:
- HONDA MONKEY125 19-22 (ABS)
- HONDA MONKEY125 19-22
There are some swage products that are more expensive, but I bought them because the quality of ac products is excellent compared to the price.
You can also choose a color that suits your taste. It do...Read More - Fits:
- Others Universal
I bought it to change it to Brembo because the caliper felt a little pushed back.
There are many colors, but there was no choice because the color that could be purchased right away was the basic gold...Read More - Fits:
- HONDA MONKEY125 18-20
- HONDA MONKEY125 21-
Monkey 125 has several supporters, but overracing products are of the highest quality.
The finish light is excellent. It may be more expensive than other brands, but I highly recommend it.Read More - Fits:
- HONDA MONKEY125 21-
- HONDA MONKEY125 18-20
Monkey 125 has several supporters, but overracing products are of the highest quality. The finish light is excellent. It may be more expensive than other brands, but I highly recommend it.Read More - Fits:
- HONDA glom MSX125
I ordered it to change from an unnamed Chinese product to this product.
It will be installed on the Monkey 125. It will be easy to mount.
I checked that the Monkey cable can be installed up to 30mm up...Read More - Fits:
- HONDA BENRY CD50 -05 [Number of stock links] 98 [Degree of fit] ◎.
- HONDA Bently 50S 96-03 [Number of stock links] 98 [Degree of fit] ◎.
- HONDA Dream 50 97-99 [Number of stock links] 112 [Degree of fit] ◎.
- HONDA Press Cub 50 BND/BN1/BP1/BS1/BV1 [Number of genuine links] 100 [Degree of fit] ◎.
- HONDA Dream 50 97- [Number of genuine links] 112
- ...and more.
The pure chain stretches too well and also hears a lot of noise.
After changing to this chain, it feels strong and doesn't make any sound
It is quite satisfactory. Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING