After all this time, I regret why I bought this product.
Waterproofness is not Packing or Coking, so water will eventually get inside.
A high-pressure car wash would get the water in quickly.
In the photo, the root of the Rubber looks soft and bendable, but the Rubber is hard and almost unbendable.
The Image is that it moves for the rattling of the parts.
It is not comparable to other companies' products that bend really well.
I think it will break in one hit if it rubs.
The Bullet Terminal at the end of the wiring must be crimped and installed by yourself, so if you do not have a tool, you should not use it.
I really want to ask myself why I chose this a few days ago.
30.44 ~ USD (4,516 JPY) 31 USD Save 2%
Webike Point: +45~ pt
(0.3 USD)
Delivery Information
-
Please select product form first.
Product detail
Old Part Number
F5910(D45-60-209)
F5909(D45-60-208)
F5908(D45-60-207)
[Quantity] 2 pcs.
[IC relay] Power saving: Available Installability: △ Parts cost: Available Compatible vehicles: DC
[Cash register] Power saving: Not available Mountability: Available Parts cost: △ Applicable vehicles: DC / AC
**LED flasher will cause malfunction with stock IC relay, so please purchase "MOTOLED IC relay for direct use" or "MOTOLED Flasher Resistor" together.
*For AC models (XR50 / 100M, XLR250, WR250F-02, XR650, etc.), use the "Flasher Resistor" because the MOTOLED IC relay is designed for DC models only.
*The image may contain other colors and products.
*There may be changes in product specifications due to the manufacturer's reasons.
.
Rubber mount system reduces damage from tipping.
This product can be mounted if there is an 8mm mounting hole.
The "MOTO LED" is a model that realizes the ideal required for off-road vehicle lights.
Making the best use of the characteristics of LED,
Pursuing durability, reduction of power consumption, and compactness, the product with very high fighting power is completed.
■Adoption of ultra bright LED
Outstanding visibility with over 10,000 millicandela LEDs!
■Increased reaction speed
The response time is 0.2 seconds faster than stock bulbs, instantly transmitting the rider's intentions to the lamp for greater safety.
■High durability
It is resistant to earthquakes and shocks, hard to break, and can be used for about 100,000 hours with constant lighting.
The LED unit generates almost no heat, and there is no need to worry about running out of bulbs because there is no glass breakage when it gets wet.
No need to change the light bulb and can be used semi-permanently.
■Power Saving
It consumes about 1/40th of the amount of a stock valve, which tends to occur in vehicles with low power generation or battery-less vehicles
Cleared the problem of headlight dimming under braking.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
![Since the circumference of Handl Wright who is [ free ] confused is prepared to a Refreshing and a sharp impression, I think that it is cost-effective.
<br> Blink of LED is smart above all.](https://global-fs.webike-cdn.net/photo/article/46/1362388613746M.jpg)
Mar 13, 2022
Helpful?
Mar 20, 2021
DRC 모토 레드 엣지 홀더 키트 오 함께 장착했습니다
DRC 모토 레드 엣지 홀더 키트 오 함께 장착했습니다디자인이 매우 심플합니다고무 부싱이 되어있어서 파손이 덜 될듯 합니다하지만 습기가 차는 것에 대해서는 좀 더 사용해 봐야 할듯합니다crf250l 에 장착했는데 앞뒤 작동이 않됩니다앞뒤 윙카를 동시에 교체하실분들은반드시 TST LED신호 릴레이 아쟈스타 불 2 핀 과 함께 구매하세요----------------------------------------------DRC Motto red edge holder kit was equipped with fiveDesign is very simple,You are in the rubber bushing damage is less doeldeutBut we should use moisture more about what the car haldeutI was seated in the front and rear crf250l will not workIf you replace the front and rear simultaneously wingkaBe sure to purchase with the TST LED signal lights relay adjuster Star 2 pinsPowered by Google Translator
View DetailHelpful?
Dec 29, 2020
Lens is recommended with Colorki.
I decided on this product with the Rubber mount because of the LED Blinker and the damage it can cause when tipped over.
In this day and age, we dared to go with Clear Lens.
It's been about a year since I stored it in a place where it was exposed to the west sun.
This would make the old fashioned Blinker look like Orange, or worse. [Color] I think it should have been Smoke.
Helpful?
Oct 20, 2018
CRF250L mugenSpec. Mounting on.
To install it, I removed the Headlight and removed the OEMConnector from the strange Wiring, so I could not remove it ... I took it off and removed the OEMBlinker. When installing here it is Bullet Type Terminal, so it went without difficulty.
To connect to the OEM terminal, 2 - pole Hondafor Vehicle Connector is required. Is Spec, Spec. So I wanted to make it 3 - poleConnector, add another one to Plus side, and specify Spec. We are increasing visibility.
Helpful?
Jun 11, 2016
Because it was cheap for the time being
I am looking for LEDFlasher and the price is Pin Kiri, but this item is cheap and the quality looks good, so I bought it.
Is it for Off? Well, the base is quite soft, it seems unreliable, but it will not be like something like folding with KICK on a get-on and off.
If you find something you like it will be good to exchange.
Helpful?
New Custom Articles
