Really good,sturdy build quality and brightness! I used them on my Kawasaki D tracker X. Arrived within a week to Sri Lanka!
View Detail
28.1 ~ USD (4,170 JPY) 29.65 USD Save 5%
Webike Point: +42~ pt
(0.28 USD)
Delivery Information
-
Please select product form first.
Product detail
Old Part Number
F5902(D45-60-108)
F5901(D45-60-107)
2 pcs.
[IC relay] Power saving: Available Installability: △ Parts cost: Available Compatible vehicles: DC
[Cash register] Power saving: Not available Mountability: Available Parts cost: △ Applicable vehicles: DC / AC
**LED flasher will cause malfunction with stock IC relay, so please purchase "MOTOLED IC relay for direct use" or "MOTOLED Flasher Resistor" together.
*For AC models (XR50 / 100M, XLR250, WR250F-02, XR650, etc.), use the "Flasher Resistor" because the MOTOLED IC relay is designed for DC models only.
*The image may contain other colors and products.
*There may be changes in product specifications due to the manufacturer's reasons.
.
The "MOTO LED" is a model that realizes the ideal required for off-road vehicle lights.
Making the best use of the characteristics of LED,
Pursuing durability, reduction of power consumption, and compactness, the product with very high fighting power is completed.
■Adoption of ultra bright LED
Outstanding visibility with over 10,000 millicandela LEDs!
■Increased reaction speed
The response time is 0.2 seconds faster than stock bulbs, instantly transmitting the rider's intentions to the lamp for greater safety.
■High durability
It is resistant to earthquakes and shocks, hard to break, and can be used for about 100,000 hours with constant lighting.
The LED unit generates almost no heat, and there is no need to worry about running out of bulbs because there is no glass breakage when it gets wet.
No need to change the light bulb and can be used semi-permanently.
■Power Saving
It consumes about 1/40th of the amount of a stock valve, which tends to occur in vehicles with low power generation or battery-less vehicles
Cleared the problem of headlight dimming under braking.
■Sharp shape and neatly organized.
This product can be mounted if there is an 8mm mounting hole.
Set of 2, left and right.(Exclusive for 12V vehicles)
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
![[Webike Monitor] The Blinker of DRC suits an Off vehicle too.
<br> Visibility is satisfied comparatively [ small ] by the Outclassing.
<br> Since Webike is markedly cheap, it is better than buying it with other Schopp moreover.
Since a Position function](https://global-fs.webike-cdn.net/photo/article/14/1339570274614M.jpg)
Installed on: HONDA CRF250L
Dec 7, 2021
Small but still sufficient bright to replace the original blinker. Spacers are provided to adjust the distance between blinker and fairing. Bullet connectors are also included.
View DetailHelpful?
Oct 25, 2020
I installed it on my Yamaha Max star125's Lear.
Because the mounting diameter was small, I made the blinker screw in by drilling.
The Angle Adjustment Collar is also included, so it's easy to adjust.
The LEDs are also bright, which is a nice touch.
Helpful?
Aug 22, 2020
If you want to put the LED Blinker on a SMART
I used it on my WR250F.
In the original blinker position, it interferes with the Cowl and so on.
I'm very happy with the brightness and very happy with it.
Wiring should not be a struggle at all if you can install the Bullet Terminal.
Helpful?
Sep 11, 2016
There are many users in Off-road motorcycleUser, but this LED blinker is cool with SMART design, and well suits On road motorcycle.
Moreover, since it is a simple installation that does not depend on the installation method, it is satisfactory that it can easily be attached to the car body with my own Bracket.
Helpful?
New Custom Articles
