?
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
It was installed on an APE that was bored up to a DAYTONA 80.
Sprocket GEAR ratio, Air Fill, Exhaust System, High Camshaft, CDI installation and setting will make your dream of 3 digits a reality.
The intake manifold is also larger than those of DAYTONA and KITACO, so it may be possible to combine it with KITACO's SPL.
It can be used for APE 100 as well, but even for normal engine, just changing CDI and Exhaust System should be effective enough.
Fits: HONDA monkey (ab27-1000001-1899999), HONDA monkey (Z50J-1300017-), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla) (ab27-1000001-1899999)
I was super happy with this kit! I could believe how well it fitted and the bike ran well with the factory settings. Super happy and would order againView Detail
Fits: HONDA APE 100 HC07-1000001-
my stock carb is suck so i bought this thing and install after that, my bike is pretty workedthe power is increase beforeI highly recommend this :)View Detail
Fits: HONDA APE 100 HC07-1000001-
I have used carburetors from other manufacturers, but for me personally, the sp takegawa is very good, it has high durability, and there are kits for sale, which solved the problem of looking for other air intake products , but the only disadvantage is that this carburetor has an ordinary shape, in addition to being durable and favorable, the use effect cannot meet my needs temporarilyView Detail
The SP Takegawa TC20 fixes all the carburation problems caused by cheap Chinese replacement carburettors. The TC20 appears to be a PC20 with the idle and air mixture screws on the left side of the carburettor body. There is no need for adjustment when fitted to a standard tune CT110, the TC20 is set perfect from the workshop. I tried adjusting it "richer" via mixture (1/2turn) and/or needle position (2nd position) and this gave slight hesitation.The TC20 makes my standard (72xxxkm) CT110 carburate cleanly with all the power available everywhere.Fitting is a easy swap using a pod air filter and basic tools. The standard fairing still fits if one trims the choke lever as depicted. Only drag is the need (must have) for a 2 into 1 fuel cock that can be had from (Kitaco) Webike Japan, of course.I recon this TC20 is the first tuning part one should install even before a performance exhaust, the responce it gives between 50-70kmh is better than the OEM carburettor and removes that mystery roughness from any inferior Chinese OEM copy. Best investment for my CT110!View Detail
Fits: HONDA Dream 50 radius, HONDA Dream 50 (AC15-1000001-)
Very very~ Good!!This is honda dream50 cav pe24 takegawa special parts product. I am super Korean in Seoul. Honda Dream50 Owner.View Detail
Purchased for regular replacement.
If it were a little cheaper, I could get a stable replacement...View Detail
?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Grip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING