A Turbo filter will be discovered, if you think that he will change a Filter and it is searching by ... to the extent that it is already unwashable just before tattering, if a state is regarded as a Normal filter being washed since it ran to about 10000 km.Although Saki who attaches thought that he would be a Filter in name only, when it runs, it is forcible acceleration of a low speed to medium speed.Although the maximum high speed did not change ... the
Normal filter -- durability -- merit -- since that is right, it is recommended.




















This picture was provided by our customers, which maybe similar but different product.
- Sale
- Instock
- Tariff-Free
・This option is not available.
・Please select other options.
9.36 USD (1,389 JPY) 10.11 USD Save 7%
Delivery Information
In Stock (Partner's Warehouse), Ships around 23rd Jul. 2025
Estimated arrival date around
FITMENT
-
BWS(BWS)
Taiwan specification 4VP3/4/9/A
-
Grand Axis 100
5FA1-6 98-07
Product detail
**Some vehicles require an increase in the number of main jets to match the increase in intake air volume.
*The direction of installation (front or back) differs depending on the model.Please refer to the instruction manual after installation.
*Please use neutral detergent for cleaning, rinse well with water, and dry in the shade.If the product is found to be deteriorated or damaged during maintenance, be sure to replace it with a new one.
*Main jet replacement guidelines: Depending on the burnt condition of the plug, #5 up.
*Stock main jet number: Grand AXIS100 (98-00) #78/H, AXIS100 (01-06) #74/H, BWs100 #72.5/J
*Replacement Main Jet Part Number: Grand AXIS100 93773
■About the installation direction of the turbo filter
*Basically, it is recommended that the yellow side (coarse side) be installed on the outside and the black side (fine side) be installed on the carburetor side.
However, the direction of the yellow side and the black side may be reversed only in some vehicles, so please refer to the instruction manual.
*There may be changes in product specifications due to the manufacturer's reasons..
This is a dry type air filter that can be easily replaced with a standard air cleaner to increase power.
The combination of a coarse filter and a fine filter improves the intake efficiency and increases peak power and acceleration just by changing the filter.(Peak power: 0.3PS-1.0PS up)
■Conventional part number:37050
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
Delivery Information
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Fits:YAMAHA BWS(BWS) Taiwan specification 4VP3/4/9/A, YAMAHA Grand Axis 100 5FA1-6 98-07
Excellent
Mar 11, 2013
Fits:YAMAHA BWS(BWS) Taiwan specification 4VP3/4/9/A, YAMAHA Grand Axis 100 5FA1-6 98-07
Average
Jan 24, 2011
Since motorcycles were not once exchanged since purchase, it purchased.
As comment, rotation of a high speed area is touch called the kana ? which became good after the kana ? in which luck of the engine at the time of a feeling axel open beam became good.
But when compared with the pure wet type, a hand did not become dirty, either but it was easy to exchange.
Fits:YAMAHA BWS(BWS) Taiwan specification 4VP3/4/9/A, YAMAHA Grand Axis 100 5FA1-6 98-07
Very Good
May 18, 2009
It attached to the grand axis.
It was used in order to improve suction efficiency, since the 113-CC bore up and the chamber of a daytona are also exchanged.
A main jet also needs simultaneous exchange at the time of exchange.
A suction noise does not become being able to do similarly with normal.
pure -- it is recommended, if chamber exchange is carried out although it is somewhat more expensive.
Fits:YAMAHA BWS(BWS) Taiwan specification 4VP3/4/9/A, YAMAHA Grand Axis 100 5FA1-6 98-07
Average
Jun 1, 2007
I attached to 1 type of a grand axis.
Although he wanted to raise induction efficiency in the case of wearing of a sports muffler and being thought, since he did not want to remove an air cleaner, it attached this.
It seems that setting of the carburetor was performed since the muffler was changed, but 1 type does not have to carry out exchange of a main jet if a description is seen.
Fits:HONDA NSR250R 90-96
Average
Jul 16, 2022
Considerable increase in inhalation
Changing this much in NORMAL will increase inhalation considerably.
I think I need to re-set it.