I immediately hit Knee Slider and wanted to convert it to Rear Sets, but the price was - - -
I introduced the product here.
- About installation
The most difficult thing is to remove the split Pin attached from the beginning. Other than that it is very easy.
- Traveling Check
I am doing Gymkhana, but I can deepen the bank angle during the practice of figure 8 and it is enough to rub the shoes when entering.
I felt the ankle somewhat cramped at OEM's footpeg position, but it was adjusted and improved.
"I do not want to hit the Knee Slider soon!" "But I do not run Circuit" Those who are interested are by all means Recommendation.
- Sale
- Instock
90.7 USD (13,458 JPY) 101.09 USD Save 10%
Webike Point: +135 pt
(0.9 USD)
Delivery Information
In Stock (Partner's Warehouse), Ships around 23rd Jul. 2025
Estimated arrival date around
FITMENT
YAMAHA
Open Fit Model Information Table
-
MT-03 (2015-)
16 MT320[Frame No.]RH07J-
-
YZF-R125
23 RG86J
-
YZF-R15
23 RH21J
-
MT03
See all
YAMAHA
Product detail
Color: clear anodized aluminum
Material: Aluminum
Step Length: 79mm (Standard)
Foldable
**The foldable range is more limited than the stock step.
*Because of its structure, the step bar is located outside of the stock step.The pedal will be inward relatively, so please drive carefully until you get used to it.
*Some models may not be able to select all positions due to contact.
*If the stock step pin is caulked, it needs to be machined down.
*There may be changes in product specifications due to the manufacturer's reasons.
.
You can set the best step position according to the length of your feet and the size of your shoes, and reduce the feeling of tightness between the pedals and the step and around your knees.
You can customize your ideal position by using COZY seat and height control rod to improve the footing.
●Clear anodized aluminum and black anodized aluminum finish.
●It's a stock step replacement type.Round step bar for easy load transfer.
●The step position can be selected from 8 positions (A-H, I position is the stock step position) within a radius of about 15mm from the stock step position.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:YAMAHA MT-07 18-21 B4C6 ABS, YAMAHA MT-07 21 M419E/8BL-RM33J, YAMAHA MT-09 16 MT09A ABS, YAMAHA MT-25 16 MT250 [Frame No.]RG10J-, YAMAHA MT-25 20-21 G402E
Sep 8, 2015
In Rear Sets - - - Recommended for those who like
Helpful?
Fits:YAMAHA MT-07 18-21 B4C6 ABS, YAMAHA MT-07 21 M419E/8BL-RM33J, YAMAHA MT-09 16 MT09A ABS, YAMAHA MT-25 16 MT250 [Frame No.]RG10J-, YAMAHA MT-25 20-21 G402E
Aug 22, 2015
Is it possible to change to 8 position?
Because Yamaha vehicle was a car with OEM footpeg Pin crimped, shaving the caulked part was troublesome, but if it was not even there (If it is Split Pin stop vehicle) It is a product that can be mounted very easily. Quality is also good, the point where footpeg position can be easily changed easily was good.
However, although there are 8 Position alterable in the Instruction Manual, is Large Kim is 4 positives, is not 3 positive by fine adjustment? I could not understand the adjustment range.
Helpful?
Fits:YAMAHA MT-07 18-21 B4C6 ABS, YAMAHA MT-07 21 M419E/8BL-RM33J, YAMAHA MT-09 16 MT09A ABS, YAMAHA MT-25 16 MT250 [Frame No.]RG10J-, YAMAHA MT-25 20-21 G402E
Oct 29, 2012
It will attach with FZ1 in 2009.The place which there is no statement in
conformity table, and the Manufacturer was asked, FZ1 is not suited.Future also has no schedule of development. Although there is a reply with and purchase was given up ... A target does not have any problem as a result of
, and it has attached.Since there is uneasiness in use of a Back step and he does not want to purchase the circumference of the
Step from experience which took time in the purchase of the Repair parts before, it is large satisfaction that the Position which used and got used also by CB and GSR which were owned in the past was able to be acquired.
Helpful?
Fits:YAMAHA MT-07 18-21 B4C6 ABS, YAMAHA MT-07 21 M419E/8BL-RM33J, YAMAHA MT-09 16 MT09A ABS, YAMAHA MT-25 16 MT250 [Frame No.]RG10J-, YAMAHA MT-25 20-21 G402E
Apr 17, 2012
In order that Rubber Division of STD might surely slide, the Step of the knurl process was looked for.
This is very reasonable, and since it will hardly replace the Position of STD if it is attached without passing intermediate parts, it can be run comfortable.
In those who do not want to use a Back Type so much, and a direction to ride on by an STD Position, it is recommended!
Helpful?
Fits:YAMAHA MT-07 18-21 B4C6 ABS, YAMAHA MT-07 21 M419E/8BL-RM33J, YAMAHA MT-09 16 MT09A ABS, YAMAHA MT-25 16 MT250 [Frame No.]RG10J-, YAMAHA MT-25 20-21 G402E
Apr 17, 2012
If the object for Yamahas is purchased and a wearing
Peg is constructed to an R1Z in the upper position, a hacksaw will cut a Peg a pure Peg with a Rubber, and this time [
] which are the same position and die length generally,
which orders a short Peg from a DAYTONA as long as
processing changed into die length which resembled the Peg of the latest SS is troublesome, if a vehicle type is removed in part,Since the Peg is being fixed by the Crimp in many cases except the conformity vehicle type in
, however description of item which are considered which it can equip a little if it is a Yamaha vehicle,
with the necessity of flying the head of a Crimp with a Drill or a File -- since there is also no hard metal in particular --
which is not difficult -- even removing -- if it works using the pin which is attached after that if it carries out as a description -- completion
-- incidentally a Grease and a Screw-lock agent (substitution in nail polish etc. is possible) need to be prepared separately
Helpful?
New Custom Articles
