- NEW
185.34 USD (27,500 JPY)
Delivery Information
No Information acquired.
Product detail
Spring part number: 1774
Fork oil count / oil level: -
Preload adjustment: 3mm
Sag value: 30mm
Compression adjustment: 0.5 rotations back
Rebound Adjustment: 1 rotation back
**When using the side stand, stop the vehicle on a level surface in first gear.(Because of the lowering, the body will be raised more than stock)
*After installation, the balance of the vehicle body will be greatly changed.Be sure to to set the front and rear settings before riding.
*There may be changes in product specifications due to the manufacturer's reasons..
Hyperpro's unique low down spring that lowers the vehicle height by changing the rate and adjusting the oil level without changing the free length of the spring.
Enjoy the smooth ride of the Constant Rising Rate, which flexibly absorbs impact and holds firm at the back.
Suspension springs with Constant Rising Rate"" designed by Hyperpro. "
The spring rate constantly changes to follow the movement of the suspension.It is not too soft and not too hard, and has the power to hold on even under heavy cornering and emergency braking.
・The change of the caster at the time of braking before the corner is optimized, and it makes it easy to move to the next operation.It absorbs small gaps during cornering and eliminates vibrations that interfere with the rider.
・Unlike normal springs, these springs do not have a constant spring rate and therefore do not resonate.
・In the Netherlands, the home of Hyperpro, all emergency bikes are equipped with Hyperpro springs.
■Color of rear springs
・For monoshock... Purple
・For twin shocks... Black
●Please refer to the setting data listed for each spring part number for standard settings.
In case of lowering more than 30mm, a short side stand may be necessary depending on the vehicle condition.
If your vehicle is equipped with a preload adjuster, adjust the lowering to a level where the side stand can be used.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.