Cost performance is high since it is 2 units for this price. I used D-UNIT without taking out from Brake switch.
View Detail
DAYTONA
Power Supply Main Key Link USB2 Port for 4.8A Motorcycle (USB2 Port Total 5V4.8A)
Product # 99503
4.6 (14 reviews)- Sale
- Instock
21.26 USD (3,155 JPY) 25.61 USD Save 17%
Webike Point: +32 pt
(0.21 USD)
Delivery Information
In Stock, Ships within 24 hours.
Estimated arrival date around
Product detail
[wire length]
・+ side: Approx. 180mm
・- side: Approx. 800mm
・USB side: Approx. 500mm
1 port output 2.4A
ACC connection terminal: type 187
With 3A fuse
Protection function (USB output overcurrent protection, output short circuit protection, input reverse connection prevention, overtemperature protection)
**12V only.Not for 6V/24V bikes.
*For bikes that do not use a flat terminal for the brake switch, it is necessary to secure power from another accessory power source without using the included brake switch removal wiring.
*Images may contain other types.
*Battery installation is not possible.
*There may be changes in product specifications due to the manufacturer's reasons.
.
The power supply is simply connected to the flat terminal of the brake switch for easy installation.
The power supply is turned on and off in link with the main key.
The output of 1 port 5V2.4A is enough to charge smartphones and tablets.
You can choose between a hand clamp and an attachment method.
A waterproof plastic cap covers the power outlet, so you don't have to worry about sudden rain.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Feb 12, 2022
Easy installation☆Current condition, no quality problems!
The only installation is to interrupt the brake switch.
The rest of the work was done while looking at the Instruction Manual.
As long as you have the tools, even amateurs will have no problem at all.
However, since the Earth needs to be cotightened with the Bolt somewhere in the Frame, it may be a bit of a challenge for the Scooter, which may need to remove the Cowl.
We installed it on our PCX (2021 model).
I think the price is a little high, but I am generally satisfied.
Helpful?
Dec 25, 2021
Wiring is now easier with 2 ports.
[How is it used?
It is used as a power supply for mobile phone, Radar detector and ActionCam. （One is spare.)
Was the one you received as per Image?
I used to use a 1-port product, so I was able to grab Image.
How was your experience with it?
The wiring became simple because it became two ports, and the handling of the wiring became easy.
I don't think there is anything wrong with its performance as a power supply.
[Points to note]
There is nothing in particular, but it is important to think about the handling of Wiring well in case of Fuse replacement.
(Depending on how you handle the Wiring, you may have to replace the Fuse to get the Tank up...)
How did it compare to other products?
I don't know how it compares to other products. (Because I haven't used other company's products)
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
The point of installation is to get the power supply from Battery via ACCRelay to stabilize the voltage.
You can easily remove the power supply with Relay by using a 4-pole Relay. (The 4-pole Relay must be purchased separately.)
The other thing about Wiring is to use the Bullet Type Terminal to ensure a reliable connection.
It's a hassle, but if you neglect this, it can cause a broken wire or Short, so if you don't have these tools or materials, it's better to leave it to a Motorcycle shop.
Helpful?
Nov 21, 2021
I installed it for WirelessCharger and Radar.
The work would take about 30 minutes if it was just installation.
I connected to D-UNITPlus instead of from Brake.
It works fine
Helpful?
Sep 26, 2021
USB power supply is this one after all
This is the standard USB power supply of DAYTONA. I thought about storing the IC part under the seat, but since I brought the WR power unit body under the front cowl, I installed it in the same place. I am highly satisfied with this product and recommend it.
View DetailHelpful?
New Custom Articles
