The brightness, glow, and texture are perfectly fine and satisfactory, but the durability is too low.
I don't know if it's an individual thing or not, but in my case, it stopped lighting up less than 6 months after I bought it, and I had it replaced with a new one as compensation, but it started lighting up poorly again within a few months.
If it was a little more durable, I would have no complaints.
71.95 ~ USD (10,689 JPY) 74.05 USD Save 3%
Webike Point: +107~ pt
(0.72 USD)
Delivery Information
-
Please select product form first.
Product detail
[Specification]
Supported voltages: DC12V only
Fixed section: M8 Bolt
Color: amber
Law:
Size: Length 85mm (not including the bolt part) Width 23mm Thickness 20mm
[Size]
Length 85mm (Bolt part is not included)
Width 23mm, Thickness 20mm
The "star signal" is a "flowing blinker" that leaves a strong impression by controlling the lighting timing of the LED using a sequential relay system and seamlessly chain lighting from the inside to the outside.
Sophisticated design and elaborate details
The body has a matte black finish that blends easily with any bike.
The use of a zinc alloy material gives it a high quality feel.
Two types of lenses are lined up, chic "smoke" and delicate "clear".
SphereLight's unique structure combining convex lens and diffusion lens promises high diffusion and visibility.
In addition, we have achieved a higher level of quality by carefully crafting every detail of the body and by creating an elaborate design that does not expose the LED chip on the surface.
Safety because it "stands out"
Equipped with 6 high quality power LEDs made by OSRAM of Germany per lamp.
The system contributes to the improvement of safety by clearly informing pedestrians and other bikes of the presence of the bike through reliable illumination, and by visually communicating the intention of directional indication through chain lighting.
The back of the main body is stamped with an "e-mark" to certify that the product complies with the United Nations Economic Commission for Europe (ECE) regulations.
The power consumption, lighting area, wattage, conform to the strict safety standards.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Feb 9, 2021
Helpful?
Jul 11, 2020
Durability? And be careful when installing.
Model：XSR700
Installation Date December 2019
I bought it because I was attracted to its appearance and sequential emission.
Both front and back have been changed.
It cleared up my face area and the luminescence was fine.
It was a little difficult to install it because it is XSR700 which has poor maintenance.
But after about half a year, Left back Blinker does not turn on, and I buy again.
I thought I would install it again and spare the rest.
But I think I tightened the installation Nut a little too much, or the Rubber of Nut and Body came off I had to do it. I didn't tighten it that hard.
I had no choice but to use a spare.
I wanted it to be a little more sturdy.
Helpful?
Dec 31, 2019
Flowing Blinker Stand out (e.g. "I'll be back") It's cool
The letters engraved on the reverse side are Common For Left/Right Side, so one side is upside down
If you do not look carefully, you will not notice it, but it is a little bit of concern because it is White's indication in Black Quantity:Pair (for Left and Right) I wanted to have it made specifically for me
The material used is zinc alloy gold, so the weight is quite heavy
The LEDs are a beautiful brown color and have quite a bit of light
It looks nicer and flows blinker cooler than the OEMs
Japanese Vehicle Inspection Correspondence (EMark 50R) So you can install it with confidence
It is Wiring of installation, but because Wiring of the Bolt part is bare, there is some kind of I think that Waterproof and protective measures are necessary
In this case, I installed it on my Lear Fender Eliminator
I wanted to put a blinker base on the mounting part, but because the Bolt length is only 20? It was not long enough A little longer would be good
It is difficult to install the Front without the blinker base, so I gave up installing it It would be better if it was longer A little longer would be nice
Helpful?
New Custom Articles
