For OEMs, the quantity below the Reflector and above the License Plate:Pair (for Left and Right) to the unnatural "Overhang" I'm very curious because I have
I think it was made to correspond to the large license plate of other countries, but the plate of the moped 2 class in Japan is small, so it becomes like this.
To solve this problem, Endurance has released the Number PlateRacket for Replacement.
After the replacement, the unnatural "Overhang" I've lost the "I" and Refreshing.
The installation is not particularly difficult.
It's a niche product, so it's not surprising that the price seems high...
Owner is satisfied with the results.
25.99 USD (3,857 JPY)
Webike Point: +39 pt
(0.26 USD)
Delivery Information
This item is discontinued.
Product detail
[Color]
・Bracket part: Black (EDP coating)
[Material]
・Bracket part: Steel
[Plate thickness]
・3.2mm
[Installation time]
・0.1h
[Set components]
・Body
・Screw
**The installation of models is not checked other than those listed in the compatibility check list.If your vehicle is not listed, it cannot be installed or has not been tested.
*Due to the characteristics of the product shape and manufacturing process, this product may have uneven color due to electrode marks and air accumulation during coloring.
*The color of the product may vary depending on the shooting conditions, monitor, product lot, and left and right of the set product, but returns or exchanges is not accepted.
.
The stock license plate bracket is larger than the license plate and looks bad because it sticks out.
This product has a bracket that does not protrude from the license plate, and the mounting position of the reflector and license plate has been fine-tuned for a smoother appearance.
The reflector and nut are removed and reused as they are.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:HONDA Super Cub C125 18-21 18.9- [JA48-1000001-]
Jan 24, 2022
For people who care about the details.
Helpful?
Fits:HONDA Super Cub C125 18-21 18.9- [JA48-1000001-]
Apr 15, 2021
A common complaint of C125Owner is the License Plate Holder.
The shoulder part of the holder sticks out when you put on the plate of the moped of Japan which is small compared with overseas.
This product has a narrower width and can be refreshing by replacing Normal parts.
The PlateHolder is attached to the Rear Fender with three nuts, so it is only necessary to remove the nut from the back of the Fender and attach it with the Bolt & Nut included in the product. I used a socket wrench with universal joint.
It's well made and seems to be as durable as Normal parts.
Helpful?
Fits:HONDA Super Cub C125 18-21 18.9- [JA48-1000001-]
Apr 3, 2020
It doesn't stick out like the NORMAL License Plate Bracket and is SMART I'm on, paint I thought the quality of both the accuracy and the quality was high, and installation was easy thanks to the high accuracy
View Detail
Helpful?
Fits:HONDA Super Cub C125 18-21 18.9- [JA48-1000001-]
Nov 17, 2019
If you are unhappy with the OEM License Plate Bracket
C125's OEM License Plate Bracket is ThailandSpec If you install the number of FOR JAPAN MODEL, the bracket will be Number These are ugly parts that stick out from
Honda should replace it with a JapanSpec. bracket, but for some reason it is still in circulation I do
I was going to cut it off with a sander, but I happened to have a pre-release Endurance product I found it and ordered it
The OEM reflector and the Number holding rubber are diverted and installed
There are no problems with accuracy and it fits easily
Helpful?
New Custom Articles
