I don't know where it's made, but the quality is good considering the price!
I wasn't sure if I should use the Fog Lamp from PIAA, but this one is totally sufficient
It's rather brighter than Headlight, even from friends! I was told
It's that bright
It's good because it's an LED, which means less electricity is needed to power the product
- Instock
26.83 USD (3,981 JPY)
Webike Point: +40 pt
(0.26 USD)
Delivery Information
In Stock : 4 left, Ships within 24 hours.
Estimated arrival date around
Product detail
[Set components]
・Fog lamp x 1
・Mounting bracket x 1
[Size]
・Harness length: 30cm
[Specification]
・Kelvin: 3000k
・Beam angle: 30°
・Power consumption: 10W
・Current: 0.7A
Drip-proof
・Dustproof
**This product is for DC12V only.When connected to an AC power source (AC), it will light up at first, but the circuit will soon burn out and the light will fail.Please check the power supply before installation as it is common in mopeds and scooters.
*This product is intended for installation (switching relay harness) of Delta Direct product (D-1678) fog lamp.Use of this product in conjunction with another company's product is at your own risk and is not covered by the warranty.*There may be changes in product specifications due to the manufacturer's reasons.
.
Brightness comparable to that of headlights, which is also safe for nighttime driving.!!
3000K (Kelvin) yellow issue to back up riding in rain and fog.
With a light intensity and range comparable to that of a headlight, this lamp improves visibility when riding at night, making it safer and more secure for both the rider and the surroundings.
Related Products: D-2149 Car Inspection Compliant Switch Harness Fog Lamps can be installed!
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Jun 4, 2020
Helpful?
Apr 12, 2020
Comparing with the LED fog of KITACO, I think that there is no large difference in shape and performance, and I think that there is a little bit less expensive LED fog I bought this Lamp
However, when trying to tighten the Bracket mounting bolts during installation, the M10 Can't slip and tighten with Spanner or Glasses, and the M9 tool won't fit?
When measured with Caliper, it was a whopping 9.5mm square Bolt and Nut
I don't have a tool of that size, so I ended up with an M10 Stainless bolt and Nut I bought the
In addition, the part of the body uses the Cap bolt of M3 I was about to lick it with Bolt, so I replaced it too
In the end, it might have been less expensive to buy a KITACO Lamp
I have no complaints about the key Lamp performance
Helpful?
New Custom Articles
