Two turn signal signs, white and yellow. Carbon pattern design. Small adjustment range. Three electrical wiring.bright light
View Detail
157.37 ~ USD (23,350 JPY) 168.49 USD Save 7%
Webike Point: +234~ pt
(1.57 USD)
Delivery Information
-
Please select product form first.
Product detail
[Color]
・Mirror shaft: Matte black
・Body mounting washer: Matte black
[Material]
・Mirror body: Lightweight reinforced resin
・Mirror shaft: Aluminum Shaft
・Body mounting washer: steel washer
[Size]
・Mirror surface size: Length 169mm / Width 82mm
・Mirror shaft size: Shaft length 100mm
・Compatible mirror fixing bolts: M8 right handed screw, M8 left handed screw, M10 right handed screw, M10 left handed screw
Mirror one side: Uses 7 LED chips
Clear Lens: E6 mark engraving
Position lamps: Silicon tube style molding hardening white LED
[Set components]
・Mirror body (right / left set)
・Mounting screws included: M10 right handed screw x 2 pcs., M10 left handed screw x 1 pc., M8 right handed screw x 2 pcs., M8 left handed screw x 1 pc.
・Mirror hole cover
* Mirror surface is more than 94mm, and outer diameter of the main body is less than 150mm Square and irregular shape: A perfect circle of 78mm in diameter should fit inside the mirror (ellipse is also an odd shape).It is a conformity product (length 120mm x width 200mm or less).
*The E mark on this product is not necessarily effective depending on the installation vehicle, regional environment, etc.
*If you use this product with existing blinkers, you do not need to replace the relay. However, if you use this product alone as a blinker, you will need an IC relay compatible with LED (Kijima part number #304-052, #304-0526, etc.).Please confirm in advance which IC relay is required for your vehicle before considering.
*This product is a universal product and requires modification to the vehicle for installation and connection of the blinkers.If you have any questions about the installation of this product, it is recommended that you have it installed by a professional shop or vehicle dealer.
*Not all mirror holes can be installed on motorcycles with the bolt set included in this product.Please check the type of mirror bolt before considering..
* The image is only for reference. The image shown may differ from the actual product.
The TECH Mirror with blinker and position lamp function that has been well received has a new lineup of handlebar mirrors with sequential (flowing and shining) function!
The streamlined form composed by the sleek Sette Primo (multi-curved surface configuration) design gives the vehicle a sense of unity with the body and a sense of lightness!
The bolt set (M10 right handed x 2, M10 left handed x 1, M8 right handed x 2, M8 left handed x 1) is included in advance so that it can be easily installed on various types of models that use handlebar mirrors.
The mirror shaft is an aluminum shaft with a total length of 100mm, which allows for smooth rearward checking.
The mirror mirror angle adjustment ball joint system allows for a wide range of mirror position adjustment!
This is a standard convex mirror with a mirror surface size of 82mm (length) x 169mm (width), and is compliant with the new vehicle mirror standards approved on January 1, 2007, so you can install it with confidence!
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:Others 12V Vehicle
Installed on: KAWASAKI Z900RS
Fits:Others 12V Vehicle
Installed on: HONDA CB1100 RS
Mar 19, 2021
Beautiful teardrop shape, white LED DRL and sequential LED blinker/indicator
I've wanted to replace my Honda CB1100RS stock side mirror (chrome round shaped) to a black teardrop shaped and I finally found this black beauty with LED DRL and sequential blinker/indicator. I feel the handle bar is lighter now, easy to maneuver probably because it is small and lighter (ABS vs stainless steel) and less wind blast to the arms. No manual, just three wires to connect:1.Black (Ground) -> Dark Green2.White (DRL) -> White-Sky Blue (Right), White-Orange (Left)3.Yellow (Sequential Indicator/Blinker) -> Sky Blue (Right), Orange (Left)However, when I started the engine or put on hazard lights. All my blinkers/indicators will only lit dimly or not at all. I believed not enough power to light up all 6 blinkers/indicators. At the end, I just wired the DRL (There are 7 amber LED to animate the sequential blinkers/indicators on each side)
View DetailHelpful?
New Custom Articles
