It's a pretty normal Bar End, but it doesn't look bad
I wore the blue one and the color is a little light, it looks bright blue in the picture
The bottom line is, we can install it on Nyken
I think the MT09s and Yamaha's Bar handle can usually be reached I looked up the part number in the Yamaha Parts catalog myself and it was the same as 09 It's installed
I asked Webick about it and he said it doesn't fit, but I wish they'd do a better job of researching it, et al I'd like you to look into the parts that can be installed on Nyken as well
- Sale
26.55 ~ USD (3,940 JPY) 35.05 USD Save 24%
Webike Point: +39~ pt
(0.26 USD)
Delivery Information
-
Please select product form first.
FITMENT
YAMAHA
Open Fit Model Information Table
-
MAJESTYS
14-18
-
XSR700
18
-
XJR1300
98-15
-
GRAND MAJESTY400
05-11
See all
YAMAHA
Product detail
Compatibility: Yamaha
Type: scratch type
Japan
**Images may contain other colors.
*The stepped dimensions may vary depending on the stock vehicle, and the amount of protrusion of the bar end plug may vary.Please refer to the dimensions before purchasing.
*This product cannot be installed on vehicles equipped with inner weights.
*There may be changes in product specifications due to the manufacturer's reasons..
A masterpiece of "creation" and "beauty".
[PREMIUM ZONE] series
■Made in Japan with care.
■Finished with delicate and careful grinding by a master craftsman.
■The elegant dual anodized aluminum finish makes the two colors stand out.
This bar end plug is designed for YAMAHA vehicles, for which the length of the neck was not long enough for the general bar end and the fixation was unstable.
The length of the plug end is the same as stock, so it can be installed on vehicles with stock M16 x P1.0 threaded bar end without destroying the female thread inside the stock handlebar.
The popular scratch type is available in four color variations.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:YAMAHA MT-07 14-18, YAMAHA MT-07 21 m419e/8bl-rm33j for yamaha, YAMAHA MT-09 14-18, YAMAHA MT-10 17, YAMAHA NIKEN 18
Apr 29, 2019
Helpful?
Fits:HONDA ADV160 23, YAMAHA YZF-R3 15-22, YAMAHA N-MAX125 16-20, YAMAHA N-MAX155 17-20, YAMAHA XMAX 18-22
Installed on: HONDA CB400SB (Super Bol D'or)
Jun 4, 2025
Looks Premium – Pricey but Worth It!
Fitted this on my CB400SF — installation was easy and it fits perfectly with the stock handlebar. The design and finish look really premium, definitely stands out. It’s a bit on the expensive side for bar ends, but the quality and style make up for it.I’m planning to upgrade the oil filler cap and brake pump cover to match this same design. If you’re going for a classy, coordinated look, this is a great start!
View DetailHelpful?
Fits:HONDA CB1300SP 98-22, HONDA CB1300ST 98-22, HONDA CB1300SF 98-22, HONDA CB1300SB 98-22, HONDA NC700X 12-13
Installed on: YAMAHA MT-09 (FZ-09)
Nov 28, 2024
Genuine Daytona Premium Zone Bar-End Plug KIRIKO
These were purchased as a nice accessory and to finish off some boring looking bars on the Yamaha MT09. There were a few options to choose from in regards to colour. We opted for the ash silver version which would go nicely with the other small silver accents already on the bike. Bar ends can also have a protection to them in a case of an accident. This saves the actual end of the bars and doubles as an anti-vibration. The price from Webike was really good value and when they arrived I could see why they had this price tag. These were shipped with some other items I needed to order and all arrived in 5 days. Expertly packaged by Webike warehouse and no damage was sustained during transit. These came with all the necessary parts needed to fit. The bar ends are very nicely machined with a great pattern. The colour is a deep black with a gorgeous silver accents added. Although I did expect these to be a little bit heavier, they are still good enough to stop most of the bar vibrations. Fitting was straight forward and the bolts provided were also excellent quality. All in all, very pleased with the purchase. Daytona is not a brand I have used before but I will certainly have them on my to buy list from now on.
View DetailHelpful?
Fits:HONDA CB1300SB 98-22, HONDA CB1300SF 98-22, HONDA CB1300ST 98-22, HONDA CB1300SP 98-22, HONDA CB1100 10-22
Installed on: HONDA CT125 Hunter Cub
Nov 1, 2023
I purchased my Daytona Premium Zone handle bar end weights from Webike expecting to receive a 'nice' set of bar weights to replace the bland OEM units from Honda. WOW, these aren't 'nice', they're beautiful!Weighty which is a good thing, but the machining and colour on these is fantastic. Fit is spot on, and changing them over from the stock units is straight forward. I only had them on the bike for a few days and I've had at least three people comment on these items.If you want a little 'bling', these are a must have. Highly recommended, and as usual, Webike is the only team to buy these from, especially for international purchasers.
View Detail
Helpful?
Fits:HONDA ADV160 23, YAMAHA YZF-R3 15-22, YAMAHA N-MAX125 16-20, YAMAHA N-MAX155 17-20, YAMAHA XMAX 18-22
Jul 31, 2022
I thought it would be a little light in terms of weight, but so far it has been good with no vibration. I would like to use it for the time being.
View DetailHelpful?
New Custom Articles
