Multi Mounting Bar FE

PCX125 (JF28) When I tried to install the clicker of the smartphone mount to the handlebar, I could not install it because there was not enough room for the shape of the handlebar and clearance.
So I bought this one to install a clicker.

Clicker:https://www.webike.net/sd/24189214/

[How is it used?

In use.

Was the one you received as per Image?

It was just as Image.
The texture is appropriate for the price.
The rigidity is also sufficient.

Was the installation difficult?

It was very easy.

How was your experience with it?

I was able to fix the clicker with no problem.
It's been in place for about a month, but the Screw hasn't loosened, and it's fixed.

[Included Parts:were they on?

It was attached properly.

[Was there anything that disappointed you?

Nothing in particular.

Other items that would be helpful

Point and hang of installation
It was only to remove the screw under the front of Master Cylinder which is easy to access, and to bite the Adapter there.
It is more efficient if you tighten the screw on the Mount bar side a little first so that it doesn't bran.
It takes less than 10 minutes to Bolt On, but you will need a Hexagonal Wrench and a Hexagonal Spanner.

[Availability and clarity of the Instruction Manual
Instruction Manual is attached properly.
I can kind of tell just by the product.

[Notes]
In this kind of product, the paint often peels off from the part where Gold genus and Gold genus touch each other, and RedRust occurs from there. I don't see any sign of it after a month or two, but I think it will last a long time if you spray it with Rust Stopper from time to time.

The Mount Bar Body is the same, but the Bracket Only is different.
If you don't mind a little Gap, or if you use a Universal Bracket from Home center or 100 yen, you can install it on various cars.

Big scooter type? I bought the MAJESTYS of the MAJESTYS and I bought it I'm not particularly useful at this point because I'm not a fan of attaching my phone etc. to my motorcycle However, it is good for the dress-up feeling and for improving the rigidity of the handlebar area However, I think the price is too high for the product I feel that 3,500 yen is high for a simple iron bar It would be nice if this was a lightweight AluminumMaterial etc I think that the stiffness around the Handlebar will be different between just attaching and not attaching It's one of the parts that I'd like to wear

My Motorcycle, GSR 250 is for Separate Handle,
You can not install Smartphone Holder or USB power supply like Pipe Handlebar. (Image 1)

There is a mount bar with Mirror bolt attachment and Lever holder attached Stem hole attached,
Mounting position and difficulty (Parts must be prepared separately) There was, and as I was looking for,
Bracket part has degrees of freedom, Material : I found this item that is not as expensive as Aluminum.

Although it was described as for PCX, GROM, MAJESTYS,
"Somehow it will become possible - - - I thought, I attempted the installation work and tried installing. (Image 2)
There is another mount bar in the Left Side, but I think that it can be installed even if it is NORMAL.

Bolt that is included in the product is M6 × 35 mm, but because it is too long for GSR 250,
M6 × 30 mm for Bolt of Handlebar Lever of GSR 250 Quantity : Because it was able to install just by preparing 2pc
I am satisfied that Portable navigator was installed at the position I expected. (Image 3)

Because the included Bracket is Universal, most Scooters - I think we can install it in Motorcycle.
Material : Cost is also cheaper than Aluminum Simple and Black place is favorite
We have secured places to install Smartphone Holder, USB, Cigar socket

我的摩托车是YAMAHA NMAX155，我在webike购买了这款DAYTONA多功能把手支架，它固定在原厂后视镜座上很牢固，用M10螺丝固定，管径22mm可以安装手机支架和其他配件，设计简单好用不会影响骑行安全。