I bought this because the OEM Shift lever was getting a little bent.
The fingertip part of the Shift lever became thicker, so it became easier to change the Shift. The fingertip can be adjusted so that you can set the position that suits you.:The Pair is also sold, so you can replace it when it is lost. But you need Screw lock to fix the tip of Parts.
- Instock
44.48 USD (6,600 JPY)
Webike Point: +66 pt
(0.44 USD)
Delivery Information
In Stock : 3 left, Ships within 24 hours.
Estimated arrival date around
Product detail
Old part number:ZE90-3346
[Color] Blue
[Material]
Chip mount: A7079 material
Arm: Forged A2014 material
**When you change the chip position, be sure to apply thread locker and tighten it firmly.
*Please use the same shape of replacement tip mount as shown in the compatibility chart.If a different shape is installed, it may interfere with the engine case cover..
* The image is only for reference. The image shown may differ from the actual product.
The rotary tip allows you to select 6 ways adjustable positions!
The tip position can be adjusted in 6 s\ways including the stock position.
You can choose the one that best suits your shifting feeling.
The chip mount is made of A7079 and is machined with high precision.
Knurling on the tip prevents slipping.
Forged A2014 material is used for the arm part, which has high strength and durability.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
- ALL
- Japan (44)
- South Korea (5)
- Australia (2)
- Canada (2)
- Hong Kong (1)
- Malaysia (1)
- Singapore (1)
- Sri Lanka (1)
- Turkey (1)
Fits:YAMAHA WR250X 07-17, YAMAHA WR250R 07-17
Aug 19, 2021
Helpful?
Fits:YAMAHA WR250X 07-17, YAMAHA WR250R 07-17
Mar 8, 2021
Tip is careful of Bolt breakage.
This one that I used for 2007 WR250X was coated with Locktite to stop the tip tip from loosening, but the bolt broke at the third adjustment of the position and became unusable, so the one I use for WR250R has a Washer to stop the tip from loosening. Please be careful, Bolt's strength is weak.
View Detail
Helpful?
Fits:YAMAHA WR250X 07-17, YAMAHA WR250R 07-17
Mar 4, 2021
This is the best Fit I've ever had when I replaced my Boots.
I'm 42 years old, but it's not convenient to wear FASTBACK, sg12, etc. Motocross boots when I'm not on the course, so I use gAdventure as my main boot. This is really convenient because you can adjust the position with the tip quickly.
View DetailHelpful?
Fits:YAMAHA WR250X 07-17, YAMAHA WR250R 07-17
Feb 27, 2021
My wife's WR250R, which was attached to the car dedicated to Course practice, was hit by a rock as hard as possible in the practice of the gully and broke, so it is an additional introduction.
After all, it is more rigid than the OEM iron lever, and the shift touch is also different, so my wife is also a new mood, and today is also a re-practice of the rubble field.
Helpful?
Fits:YAMAHA WR250X 07-17, YAMAHA WR250R 07-17
Feb 26, 2021
It's aluminum and it broke due to excessive impact.
I put it on my wife's WR250R for the course, and I did it immediately in the morning training. At the first training on the slippery ground, I hit the rock as hard as I could and it was broken. My wife was Tone, but she was carrying OEM lever, so she continued to practice, and we had no choice but to order again.
View DetailHelpful?
New Custom Articles
