I think that it was very good that the riding position of a guide peg could be chosen.
However, since it was not goods called !! which became markedly good compared with normal, it has been parted with comparatively immediately after purchase.
168.68 USD (25,058 JPY)
Delivery Information
No Information acquired.
Product detail
Position: Back 27mm / Up 35mm
Back 12mm / Up 40mm
Back 12mm / Up 20mm
Back 42mm / Up 35mm
Back 42mm / Up 20mm
Forward and reverse shift: Available
Pushrod replacement: unnecessary
**Step bar (fixed type) is included..
●Step bar included
●Fully compatible with repair parts
●High strength aluminum alloy machined bracket & heel guard.
●Ultra-lightweight, high-rigidity change and brake pedals.
●The stop lamp can be used.
●The serration system allows you to adjust the angle of the pedals to suit your riding style.
*Serrations are adjustable in 10 degree increments for easy adjustment.
●Improved operability
Wave Washer COERCE step has a wave washer on the shaft.A normal washer is a part that connects parts to parts by the surface of the washer.However, this "wave washer" is a special washer which has a wave-shaped as the name suggests and connects parts to parts with "points".The purpose is to prevent the pedal from sliding and to improve the operability.Because of the "point" contact, the resistance to the pedal is reduced and stable operation performance can be obtained.If you apply grease at the first installation, you don't need to apply grease for a while afterwards.When bearings are used, operation is light, but greasing is required after riding in the rain, for example.In addition, the "Wave Washer" has the characteristic of pushing the pedal outward, so that the pedal can always be operated reliably without sticking.
●Regular and reverse shift can be done
Regular shift is a shift pattern set by each manufacturer to make riding easier on public roads.However, when the stage is, for example, a circuit or a winding road, it is controversial whether it is easy to drive or not.When you shift up while banking deeply in cornering, you have to put your toes between the pedal and the road surface, which is dangerous and sometimes impossible to shift depending on the road surface condition.The solution to this problem is "reverse shift".Most of the manufacturers use only "regular shift" pattern, or require parts seperately.Except for a few models, most COERCE models support "forward shift" and "reverse shift".
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.