since it failed to get off the ground and the pure step has been bent -- an opportunity [ Colet ] -- introduction.
It compares that it is pure and is light! Although a step bar goes up too much and he merely has a feeling just for a moment, it is made convinced [ by things ] in a race ish (smile).
Since it will bend for a while if it straddles, I am glad if there is already slight rigidity.
If it is downed back 15 mm and is in 10-mm back if it may be allowed to wish so much, it will be [ whether it is also the best or ].
It is recommended at those who rub a tiptoe against a circuit.
238.33 USD (35,405 JPY) 262.52 USD Save 9%
Webike Point: +354 pt
(2.38 USD)
Delivery Information
No Information acquired.
Product detail
Position: Back 40mm / Up 40mm
Pillion: Compatible with stock part
Forward and reverse shift: Available
Pushrod replacement: No
**Step bars sold separately..
●Fully compatible with repair parts
●High strength aluminum alloy machined bracket & heel guard.
●Ultra-lightweight, high-rigidity change and brake pedals.
●The stop lamp can be used.
●The serration system allows you to adjust the angle of the pedals to suit your riding style.
*Serrations are adjustable in 10 degree increments for easy adjustment.
● [Step bar sold separately]
Except for some models, COERCE's step system is sold separately from the step bar.This is because each customer's riding style is different, whether you are a street rider or a track rider.If you are a street rider, it is better to use a retractable type step bar to avoid damage, and if you participate in a competition, the step bar that is compatible with the race regulation is required.You can choose the one that best suits your riding situation.
●Position setting
The COERCE step has one type of fixed position.While the number of adjustable positions is increasing, there are still many users who do not change the step position after purchase. Then, it is decided to offer a carefully selected position at a reasonable price than to increase the price with expensive parts and processing.Of course, this is why the position is decided very seriously.The position is adjusted by assuming various scenes and riding form.It has a simple structure, but it has a good operability position.
●Improved operability
Wave Washer COERCE step has a wave washer on the shaft.A normal washer is a part that connects parts to parts by the surface of the washer.However, this "wave washer" is a special washer which has a wave-shaped as the name suggests and connects parts to parts with "points".The purpose is to prevent the pedal from sliding and to improve the operability.Because of the "point" contact, the resistance to the pedal is reduced and stable operation performance can be obtained.If you apply grease at the first installation, you don't need to apply grease for a while afterwards.When bearings are used, operation is light, but greasing is required after riding in the rain, for example.In addition, the "Wave Washer" has the characteristic of pushing the pedal outward, so that the pedal can always be operated reliably without sticking.
●Regular and reverse shift can be done
Regular shift is a shift pattern set by each manufacturer to make riding easier on public roads.However, when the stage is, for example, a circuit or a winding road, it is controversial whether it is easy to drive or not.When you shift up while banking deeply in cornering, you have to put your toes between the pedal and the road surface, which is dangerous and sometimes impossible to shift depending on the road surface condition.The solution to this problem is "reverse shift".Most of the manufacturers use only "regular shift" pattern, or require parts seperately.Except for a few models, most COERCE models support "forward shift" and "reverse shift".
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:YAMAHA TZR125 Can only be installed on rear disc models.
Oct 15, 2007
Helpful?
New Custom Articles
