Design with no waste. The divisible Concept. I sympathize with that cleanliness. I combined Fixed Type's footpeg, but I do not feel uneasy even if I apply whole weight to One Side.
View Detail
257.88 USD (38,310 JPY)
Webike Point: +383 pt
(2.57 USD)
Delivery Information
No Information acquired.
Product detail
Position: Back 35mm / Up 30mm
Pillion: Compatible with stock part
Forward and reverse shift: Available
Pushrod replacement: No
**Step bars sold separately..
[Click here for step bar]
Lubrication chemicals are here.
Here is the instruction manual..
●Fully compatible with repair parts
●High strength aluminum alloy machined bracket & heel guard.
●Ultra-lightweight, high-rigidity change and brake pedals.
●The stop lamp can be used.
●The serration system allows you to adjust the angle of the pedals to suit your riding style.
*Serrations are adjustable in 10 degree increments for easy adjustment.
● [Step bar sold separately]
Except for some models, COERCE's step system is sold separately from the step bar.This is because each customer's riding style is different, whether you are a street rider or a track rider.If you are a street rider, it is better to use a retractable type step bar to avoid damage, and if you participate in a competition, the step bar that is compatible with the race regulation is required.You can choose the one that best suits your riding situation.
●Position setting
The COERCE step has one type of fixed position.While the number of adjustable positions is increasing, there are still many users who do not change the step position after purchase. Then, it is decided to offer a carefully selected position at a reasonable price than to increase the price with expensive parts and processing.Of course, this is why the position is decided very seriously.The position is adjusted by assuming various scenes and riding form.It has a simple structure, but it has a good operability position.
●Improved operability
Wave Washer COERCE step has a wave washer on the shaft.A normal washer is a part that connects parts to parts by the surface of the washer.However, this "wave washer" is a special washer which has a wave-shaped as the name suggests and connects parts to parts with "points".The purpose is to prevent the pedal from sliding and to improve the operability.Because of the "point" contact, the resistance to the pedal is reduced and stable operation performance can be obtained.If you apply grease at the first installation, you don't need to apply grease for a while afterwards.When bearings are used, operation is light, but greasing is required after riding in the rain, for example.In addition, the "Wave Washer" has the characteristic of pushing the pedal outward, so that the pedal can always be operated reliably without sticking.
●Regular and reverse shift can be done
Regular shift is a shift pattern set by each manufacturer to make riding easier on public roads.However, when the stage is, for example, a circuit or a winding road, it is controversial whether it is easy to drive or not.When you shift up while banking deeply in cornering, you have to put your toes between the pedal and the road surface, which is dangerous and sometimes impossible to shift depending on the road surface condition.The solution to this problem is "reverse shift".Most of the manufacturers use only "regular shift" pattern, or require parts seperately.Except for a few models, most COERCE models support "forward shift" and "reverse shift".
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:YAMAHA XJR1300 , YAMAHA XJR1200 , YAMAHA XJR1200R
Fits:YAMAHA XJR1300 , YAMAHA XJR1200 , YAMAHA XJR1200R
Dec 10, 2007
Since it rubbed shortly after running the peak, normal was exchanged.
if it is this which can choose a good point:(1) retractable step, even if it should fail to get off the ground, a step bends and a pedal stops moving (a possibility that a pedal stops moving when a step bar turns at a coaxial type -- a large) -- although it incidentally stood and there is GOKE -- completely -- a problem pear.
(2) Since the amount of back-ups is ? (3) back step, even if it naturally makes it bank, it does not rub against the limit which moderation and such travel can use for touring.
(4) compared with other products, the position plate for XJR of cheap (5) WR's can be used -- it becomes three positions (UP+20~30, back +35~+45) now -- bad point: (1), although I think that every back step is the same,
Side stands and a tiptoe hit at the time of a gearshift.
He changed into the side stands of the external article.
(2) Although oneself finishing is [ himself ] a thing of a price is not worried.
(3) In the direction which calculates the retractable step a feeling is [ step ] a normal +alpha grade, the position which is not excessive, and cost since the bearing of a pedal is a bush type, it is the highest! The balance of a function and cost thinks that it is a good product.
Helpful?
New Custom Articles
