[Purchased Kit Lack
If you're a CBR650R rider, you'll know that there are a lot of Tank Pads out there for the 650R, but when you do a knee grip, your inner thighs hit the Cowl underneath the Tank, not the Tank, so the commercial Tank Pads are not practical. I bought this to put on the part of my thigh that hits the knee when I actually grip it.
I really wish they'd release a dedicated one, but for some reason they haven't …
Impressions of use
I made a paper pattern of the area I wanted, then drew a rough sketch along the pattern, then scissors and cutters along the sketch.
It's a great product for when you don't have a dedicated pad, or when you need a little something here and there for your Plus.
I've run with them a few times now and they've made my knee grip much easier.
I've only had it for about two months, but I haven't seen any of the damage or breakage common to cheap products, like tape coming off or rubber tearing!
【Review】
There is a little bit of work involved in processing it yourself, but I thought it was the number one practicality because you can process the original shape and the necessary parts to suit your needs.
The price is a little cheaper than buying a commercial Pad, so I think the cost is the strongest!
If you're riding a CBR650R and want a Pad, I'd recommend it like crazy! It's really useful lol!
45.22 ~ USD (6,710 JPY)
Delivery Information
-
Please select product form first.
Product detail
[Size] 30.5 x 15.5 x 0.19cm
[Weight] 0.36kg
**Please clean and degrease the sticking position with the alcohol cotton for degreasing that comes with the product, and stick it while being careful not to get air bubbles.
*The release paper is pink when shipped, so it looks like it is colored, but the product is set in black and clear.
*When you remove the release paper from the adhesive side, do not peel off the adhesive side, just lift up the release paper with the blade of a cutter knife and peel it off slowly.
.
![Webike staff コメント]()
Unlike inexpensive products which are simply made by molding appropriate rubber materials, these products are made of materials that have been carefully selected for motorcycle riding to provide both comfort and grip.Webic also supports "Webike Team Norick Yamaha" and "T.Pro Innovation"
.
This is the best material to make your own tank pad for bikes that do not have a specific model.
Unlike general urethane sheets available at home improvement stores, this product is the same as the Easy Grip products developed for riding, so if you can design and cut it well, you can use it with confidence.
The outline of the design can be molded with a marker and cut out with a design knife to create a free shape.
It is also useful for attaching a scratch protector to the seat, tank and cowl where the exterior parts rub against each other.
◆EVO series - Standard grade
The Easy Grip EVO series of tank pads was introduced in 2011 and features a hemispherical traction dome that provides both high grip and rider comfort.
In response to feedback from the top teams competing in the British Superbike Championship(BSB), more and more teams are adopting the BSB system.
◆PRO series - For circuit
The Easy Grip PRO series has a characteristic circular embossed surface structure, which is smoother and more dynamic than the EVO series with smaller protrusions.
It is designed to allow the rider to move freely when riding, while providing a high degree of unity with the body and grip under hard braking conditions.
◆SILICONE series・For street
The Easy Grip SILICONE series is ergonomically designed to provide the most comfortable riding experience possible.
The custom-made silicon material cushioning and surface structure reduces rider fatigue, and is active in scenes such as street running and touring.
◆PPF series
This tank guard film is made of strong & ultra thin polyurethane film.
It is made of transparent sheet, so it shows the tank design and protects the tank from scratches.
The design of the tank grip is used to protect the most vulnerable part of the knee grip.
This film can be used on any tank design and is recommended for all motorcycles.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:Others Universal
Jan 28, 2022
Fits:Others Universal
Jun 16, 2021
I used to put Sponge type on the part where Cowl's knee hits, but it became tattered, so I replaced it with this product.
I have a Stomp Grip on the Tank side and it is comparable.
Fits:Others Universal
Nov 27, 2020
It's very convenient that you can cut it to your favorite shape and it's easy to do grip and hold. The performance is not so different from the expensive ones, so you get a sense of value for money.
View DetailFits:Others Universal
Sep 29, 2020
I bought a Tank Pad because it's been a while since I've had to ride a motorcycle that has a knee grip.
There were many other pads if you look for the MAJOR vehicle, but I bought this one because I painted it original, so I wanted a pad to fit it.
It was Large to cut it to fit the shape, but I was able to put it on the body of the car to match it, so I was very satisfied with it.
Fits:Others Universal
Jul 18, 2020
The place where you can make your own shape is good!
It's a Large model, so it's a Large model to find a Small model.
So this product, which allows you to create your own shape, is a great choice for those people.
You can use it to increase the area of the car, even if it is exclusive to a car model, or you can use it to increase the size of the car, depending on Ideas. Nice items that you can use.
New Custom Articles
