【Review】
Personally sound quality, appearance, comfortable ride well, as well as a place called "Full Exhaust System" as a few vehicle inspection Corresponding Exhaust is also appreciated. When Silencer also gets degraded, it will be charged, but will also be exchanged.
【Ride Comfort】
From low rotation to high rotation, it rushes up to Smooth, since the excitement of Power will disappear, it can be said that it lacks Punch, but Smooth is treated quite cheaply as much as it actually operates. The low rotation Torque seems to be slightly falling, and the Axel opening degree for the Clutch operation at the time of departure became slightly larger Large, however, the feeling of low speed rotation peculiar to Z1000 disappeared and it became easier to run. It handled cheaply from bottom to top with this.
Weight reduction of 8 kg is pushing walking, feeling lightness in falling down during traveling, in a Pre-road adapted to NORMAL, it bounces like A little overly, on the other hand Rear load for Sub chamber disappeared Or honey in the deceleration zone is decreasing trend, so it seems that it is also aimed at improving ride comfort with attenuation keep + pre-road decrease.
【appearance】
It is Silencer of the same shape as KawasakiTeam green and it depends on preference, but I think it is Parenthesis.
Titanium's burned color is attached to the bending part of the Full Exhaust System and it is very beautiful.
Refreshing the Side view also because there is no Sub chamber.
【Sound quality】
Although it is my favorite problem, it is purchase by confirming the sound on youtube in advance, but the bass is working and it is very good. The sound pressure is different but I think that it is the same quality sound as the JSBRace vehicle of zx10r.
Impression that breath Ping from Idling is very good with the sound like Large type Motorcycle and it extends to high rotation with similar sound quality and the bass gradually fades.
When decelerating, as the rotation gets lower, I feel that the place where After Fire comes out, but I personally dislike it.
During the Auto choke the sound will be Large, so it seems to be using a little mind early in the morning.
【Mounting】
We carried out assembly by ourselves using holidays.
removal - I think that it is wise if you asked the store if you are concerned about the installation.
Disposal when removing OEM ValveCable loosens Adjuster under Fender and Cable gets loose and easily disengages. Motor's Pulley is careful because the internal GEAR is made of resin, so forcibly detaching teeth will be lost.
Disposal When DeviceCable goes out, the remaining work is just Rose. It is comfortable as Z1000 can be removed to Exhaust pipe without removing Radiator.
Although it is also described in the Instruction Manual, check the tool at the time of temporary assembling so that the tool of Oil filter for Replacement can be inserted and removed.
SilencerLeft Side changes the height of Silencer at the position of Bracket and Pipe so Quantity : Pair (for Left and Right) While checking the height, proceed.
After provisional assembly, we will install and tighten Spring.
Sometimes I was watching Oil filter I was able to secure enough clearance to remove Socket when detaching, so Filter exchange is safe.
It is simple, but Spring hook is also included in the package was kind and good.
1,925.18 ~ USD (286,000 JPY)
Delivery Information
-
Please select product form first.
Product detail
O2 sensor standard support
Full exhaust type
Weight: About 8kg lighter than stock
Oil change: acceptable
Filter change:acceptable
With stock step: acceptable
Skid plate installation: acceptable
Gasket: Accessory
**The image may contain other types.
*The volume is for reference only when new.The volume may vary according to use.The sound deadening material is consumable, so when the volume increases, rely on the BEET repair service (chargeable: For some models, please use the silencer assembly replacement).
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed..
* This item can not be cancelled, returned nor exchange after placing an order.
This silencer has the same shape as the exhaust used by KAWASAKI Works, Team Green (ZX-10R)!
New silencer end is adopted!
Features
●The straight exhaust pulse cone system provides a clear, uncluttered sound.
Furthermore, it is equipped with a special honeycomb catalyst.
●Beautiful color by heat finish and O2 sensor is standard.Under cowl can be installed
●The silencer is available in three colors: Clear Titanium (TI), Metal Black (MB) and Blue Titanium (BL).
●Compared to the stock exhaust weight of 14.5kg, the new exhaust weighs 6.5kg, a reduction of 8kg.
●Oil and filter can be changed while the exhaust is installed and this product can be used with the stock step.
●With a new assembly system based on our original theory and dual silencers, the peak power will surge through!
The synergistic effect of the weight reduction provides smooth acceleration from the start.
●The emblem is riveted.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.