AeroSpec. Purchase.
Size (height) I did not expect the windshield effect from, and I bought it with consciousness.
Well, after all, 100 km from the expressway / Helmet hits the wind more than I imagined running with h or more. My height 179 cm. If the slope of the windshield is more steep (If the height is about 5 cm after the height) I will continue to think.
Design is also Large Off, but I would like you to consider more practicality than that.
Also, as the speed increases, the whole Cowl vibrates. It is a three point screw stop on the side of the Light and the bottom, so I guess it can not be helped.
A simple Instruction Manual is attached and you can install it in less than an hour if you proceed according to it.
However, the installation position of the screw at the bottom of the Light was slightly misaligned.
I ordered Candy Ali GSX 400 E RED, but the paint color is a satisfying hue.
Most people think that they are not accessories but equipment..
It is also a reason for purchasing that I wanted to install the Cigar socket in a location that is not exposed to rain.
Cigar socket 2 series (New IngDC StationTWINSocket) On the inside Left Side (Drill holes) I installed it.. A triple thing may be impossible.
Right Side has a lot of Harness, so it will be a problem if trouble occurs, so I made it to Left Side.
It will be under the school, so it should not rain while driving.
Quantity : Pair (for Left and Right) I think that it was easier to work if I was about 1 centimeter wider.
It is ★ ★ ★ because the windshield effect is deficient for me.
- Sale
224.04 ~ USD (33,242 JPY) 264.19 USD Save 15%
Delivery Information
-
Please select product form first.
Product detail
Windshield: Made of polycarbonate
Cowl Body: FRP
Surface matte finish on the back side
Total height: 470mm
Full width: 385mm
Depth: 280mm
Weight: 1020g (Weight varies depending on models)
**However, Sick Design does not recommend the use of this product in its unpainted state.We have made it so you can choose it in case you want to paint it by yourself, or you want to paint it in your original color at a shop.
*This product can also be installed on the models with ABS specification.
*Not available for 2019 and later (17L tank) models.
*There may be changes in product specifications due to the manufacturer's reasons.
.
* The image is only for reference. The image shown may differ from the actual product.
Slightly rounded bikini cowl with standard design.
High rectification effect and fearless styling can be obtained.
This product can be installed to the stock light by bolt-on.
The light is securely fixed at three points: the right and left rubber mounts and the lower rigid mount.
The cowl body is made of FRP, and a polycarbonate windshield is standard equipment.
The windshield can be selected from clear or smoke.
Also compatible with ABS specification.
■Road Comet
Sporty mini cowl with a wide range of standard designs and high quality.
The slightly rounded shape of the bikini cowl can be installed on any type of vehicle without any sense of discomfort and enhances the original styling of the vehicle.
It also reduces wind pressure from the shoulders to the torso to support comfortable high-speed running.
The cowl body is made of multi-layered FRP for durability, with a matte finish on the back surface.
Compatible with Japanese stock color coating with acrylic urethane paint.
The windshield can be selected from clear or smoke and stainless steel screws, polycarbonate washers and lock nuts are used to attach the windshield to the cowl body.
Bolt-on installation can be done due to the exclusive design of the model
Cut line and installation bracket are set for each model, and installation is bolt-on.
No special tools are required for installation.
■Secure fixation by 3-point mount
Rubber mounts on both sides and rigid mounts on the lower part of the vehicle prevent uncomfortable vibrations and provide a stable ride even at high speeds.
All the stock colors are painted clear and the back side is also painted with the same color.
If you have a Road Cometfor which you are not sure of the application on the type of vehicle
Adaptation of Road Comet to each model is done by changing the cut line and metal fittings of the cowl body.
There is no significant difference in appearance between the two types of vehicles, but it is very dangerous to install the product on other types of vehicles as it may cause unexpected problems.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.