It is not from Wee Big but from HP of OUTEX, but I tried purchasing.
Actually it is for 33 pie x 60 l 100 Cell plug-in type 38 pie.
When exchanged to High Camshaft, I bought it because it felt annoying as exhaust pressure increased.
As a measure against noise, I was able to suppress the exhaust pressure, so it was effective enough to understand even by the bodily sensation. (Bababa -> papapa ---)
I felt the elongation of the medium and high speed range fell when traveling.
As for installation on the FMF, it is attached to the Silencer, not the Exhaust pipe side,
Because o 2 Sensor comes in contact, drilling and returning are attached to Pipe, so it will be necessary to cut, etc..
Although it is originally a product of measures against waste Gas, it is also effective for noise control.
75.63 ~ USD (11,235 JPY)
Delivery Information
-
Please select product form first.
Product detail
[Size]
Outer Diameter: 35.0mm
Length: 100.0mm
Plate thickness :1.0mm
Number of starters: 100/in2
Stainless steel tapping screws (M4 x 10mm) with 6pcs (tapping fixing type only)
**Exhaust gas test report is not included in the catalyzer itself..
Let's clean the exhaust gas!
Just put the catalyzer between the center pipe and the silencer.
The catalyzer purifies harmful substances such as carbon monoxide (CO), hydrocarbon (HC) and nitrogen oxide (NOx) in the exhaust gas emitted from the engine by oxidation-reduction reaction and changes them into clean exhaust gas.
The catalyzer is coated with precious metals such as platinum and rhodium.
As the number of cells increases, the exhaust gas purification rate improves, but the performance is slightly affected because the ventilation resistance becomes larger.
[Catalyst specifications]
・Type and amount of supported metals: Pt / Rh=5 / 1=1.4g / l
・Material of outer cylinder and honeycomb carrier: Outer tube: SUS436L Catalyzer: 20Cr-5Al
・Outer cylinder outer diameter dimension accuracy: ±0.05mm
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.