Adapter and Quantity:I bought it in a Set, but Parenthesis got better.
View Detail
186.04 USD (27,638 JPY)
Webike Point: +276 pt
(1.85 USD)
Delivery Information
Out of stock at the manufacturer.
Product detail
[6000 Series] (Suitable for mounting on the left center of the tank and the right center of the tank)
Applicable fuel hose inner diameter: Φ8
Reserve function: having
Mount Diameter: 1/4NPT
**A special adapter (sold separately / please specify from the adapter list) is required for installation.
*When ordering the PINGEL High Flow Cock, be sure to refer to the dimensional drawing and check the installation space on the vehicle body side as the cock body may interfere with the engine or carburetor.
*The mounts are available in 1/4 (6.36mm ) and 3/8 (9.54mm ), both with NPT (National Pipe Thread).Please select the size of the gasoline tank to be used.
*The total height of the high flow cock incluteeth the adapter is the sum of the height of the cock body and the adapter plus the clearance of the NPT screw (approx. 3-5mm ).
*For products imported from overseas, it may take 1-2 months to order when the product is out of stock at the manufacturer..
* The image is only for reference. The image shown may differ from the actual product.
Pingel's high-flow cock series responds to the demand for [More GAS] from tuned engines with a vast supply of tuned air intake, exhaust and drivetrains.
It has been adopted by most of the leateeth teams in the U.S. drag racing industry, which is known for its overwhelming performance, and has proven its high safety and reliability.Pingel offers a new fuel system tune-up.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Jul 25, 2020
Performance and texture are both good.
It was easy to install. I thought it was expensive, but the texture is very nice and cool.
Just in a few days, Plating got Rust cloudy. It's also very easy to operate.
Helpful?
Jun 28, 2020
I love the inconspicuous Black color
I've had a Chrome PinGel on my Motorcycle since I bought it used
Since it's an older car, the OEM Product may have been discontinued and put on as a replacement
About two months ago, I had to replace the tank due to some problems with the fuel sensoretc I went with PinGel in Black, which is less noticeable than Chrome
So far I have no complaints about the features, but as others have implied, On, Off, and I would like to see a sense of click to make the Reserve position easier to understand
Large without any knowledge of it Cook is this But I forgot to turn it off once in the past and made it overflow If there is a compatible product that can be diverted, ManufacturerOEM's negative pressure cooks are ideal
Helpful?
Feb 11, 2020
I wouldn't recommend it except for the space issue
Due to insufficient gasoline flow from Cook and interference with the Carburetor, it was unavoidable I can't blame you if you want to replace Cook, but right now I personally don't think it's very desirable
One is expensive and the other is the behavior of the Knob of Cook which is too Smooth When removing the tank and servicing it, you can't help but touch the Knob a little bit and it's a real pain! Gasoline will come spilling out at If this is driving hard, you can touch the Knob with your knee and it can turn off! It's a good idea Some of you who like to race on grass wrapped a Tie Wrap to hold the Knob in place when you ride Some people do (I suppose it depends on the vehicle, so we don't all have to go that far.)
This is due to the fact that the Knob moves too Smooth and is infinitely adjustable, so it is very similar to It seems that there are a lot of people who choose the Fuel Cock of the Go-RAN company of the product that did it The structure of this one is designed to give a sense of click to each of ON/OFF and Reserve You can switch between Chica Chi and Knob clearly, and it works Smooth Functionally, it is completely upward compatible with Chica Chi
The most Large Point of no recommendation is about Overhaul. packing replacement You need to remove the press-fit part of the press-fit part as well, which may not be a problem for those who are used to it It's not something that can be completely disassembled by loosening the bolts, so it's not something that can be completely disassembled It is inferior in sex
If you are attracted by the texture of Plating and want to make it one point, it's fine I don't think so, but my application is better suited to the use of the OEM Cook and cheap external Cook I think it's a good idea If it's unavoidable, it's not an option, but unless you have to put this on, I'd avoid it Items
Helpful?
Nov 26, 2018
Switching of the original Cook became frustrating, so I exchanged it with a good reputable PinGel.
The vehicle is ZEPHYR 750.
For the installation please see the diary.
I exchanged it and tried running, but the engine attachment has improved considerably. Rhythm of running was improved as the stiffness when Axel was turned from low rotation was reduced.
There is only thing singing MoreGAS! And this kind of effect seems to be obtained when fuel is sent to the carburetor to Smooth, so it is good compatibility with FCR Carburetor Body.
I did not expect that running would change with just one Cook. It is a pleasant miscalculation.
Helpful?
New Custom Articles
