I used it on my FZ750 520Conversion.
Of course, the Front is also SUNSTAR.
This is actually the second Repeat.
Last time I drove it, it had 23,000 km and was used for 5 years.
I use it for commuting to work, long touring, and even for circuit runs twice a year.
Because of the frequent maintenance, the Rear Sprocket hadn't lost much weight at the time of the replacement.
However, it's not the best situation, of course.
Naturally, there was a decrease in the number of teeth that hit in the direction of acceleration.
Taking into account the chain situation, I still think it's better to replace it at 20,000km.
- Sale
- Instock
79.36 USD (11,775 JPY) 101.09 USD Save 21%
Delivery Information
-
Please select product form first.
FITMENT
-
XLR200R
93
-
JADE
91-95
-
HORNET
96-07
-
CBR250R
87
See all
HONDA
-
FZ400
97-99
-
MT-07
25
-
MT-07 Y-AMT
25
-
WR250R
07-17
See all
YAMAHA
Product detail
-
Sprocket use Rear
-
Sprocket use Rear
-
Applicable chain size 520
-
Applicable chain size 520
-
Sprocket material Ultra duralumin (A7075) material (hard alumite finish)
-
Sprocket material Ultra duralumin (A7075) material (hard alumite finish)
-
Number of rear sprocket teeth 41
-
Number of rear sprocket teeth 41
-
Sprocket color champagne gold
-
Sprocket color champagne gold
■For rear
■Compatible chain sizes: 520
[Material] Ultra duralumin (A7075) material (hard anodized finish)
[Color] Champagne gold color
[Weight] Approx. 1/3 of steel (stock) etc.
[Specifications] Durability: 10000-20000km(*)
**The stock size chain cannot be used on vehicles that are set up for conversion, and must be converted to the correct chain size.
*The color and shape of the delivered product may differ from the picture.
*If you change the number of sprockets from the stock, it may not be able to be installed on some models.
*Durability is for reference only.It depends on your riding style, chain size and maintenance condition.
*Offset figures are for sprockets only.
*The actual offset of the chainline from the stock value will vary from model to model.Please note that if the stock sprocket has an offset, that value will be subtracted.(It depends on each model)
*Not all of the available tooth numbers can be installed without interference to the vehicle body.Please confirm the installation of each vehicle body according to the number of teeth by yourself.
*There may be changes in product specifications due to the manufacturer's reasons..
* The image is only for reference. The image shown may differ from the actual product.
Ultra duralumin (A7075) is used as the material, and after hardening and heat treatment T6, it is machined one by one.In addition, the surface is treated with a special hard film (hard alumite), and boasts superior hardness and durability compared to ordinary alumite products.In addition, it contributes greatly to the weight reduction under the spring by the bold cutting process while securing sufficient strength.Moreover, the natural coloration of the hard material during processing does not fade.
Sprocket Course - Basics - Frequent maintenance is the secret to riding your bike for a long time!SUNSTAR
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
- YZ125
- YZ125
- YZ125X
- WR250F
- WR250F
- WR250F
- WR250R
- WR250X
- YZ250F
- YZ250F
- YZ250F
- YZ250F
- YZ250FX
- YZ250X
- FZ400
- WR426F
- YZ426F
- WR450F
- WR450F
- WR450F
- YZ450F
- YZ450F
- YZ450F
- YZ450F
- YZ450FX
- FZS600 FAZER
- XJ6 Diversion F
- XJ6 Diversion
- YZF600 THUNDER CAT
- MT-07 Y-AMT
- MT-07 (FZ-07)
- FZR750
- FZR750R (OW-01)
- YZF 750R
- YZF750SP
- FZ8 (FZ8N)
- FAZER8 (FZ8S)
- TRX850
- TDM900
- FZR1000
- FZR1000
- YZF1000R THUNDER ACE
- FJ1100
- FJ1200
- FJ1200
- XJR1200
- XJR1200R
- XJR1300