Easy to install, economical and practical. Lowered as height at 2.5cm, while also slightly changing the headlight angle.
View Detail
- Sale
- Instock
36.46 USD (5,410 JPY) 47.18 USD Save 23%
Webike Point: +54 pt
(0.36 USD)
Delivery Information
In Stock : 1 left, Ships within 24 hours.
Estimated arrival date around
FITMENT
SUZUKI
Open Fit Model Information Table
-
V-STROM650 XT
15-17 down approx. 25mm
-
V-STROM650
23 ABS down approx. 20mm
-
V-STROM650
12-22 ABS down approx. 25mm
Product detail
[Seat Heights]
・V-STROM650(12-22), V-STROM650 XT:Approx. 25mm down
・V-STROM650(23):Approx. 20mm down
Color: Black paint finish
Material: Steel
**The manufacturer is developing the link ratio calculation and actual driving test repeatedly for each model.In general, the larger the amount of lowering, the worse the maneuverability. Please do not install other lowering parts at the same time to increase the amount of lowering of this product.If you have replaced the exhaust, rear suspension, tires or other parts, be sure to check the clearance of each part of the rear suspension at full stroke, and if sufficient clearance cannot be obtained, do not use this product.
*The amount of lowering is a reference value with a stock body (no load).It depends on the condition of the rear suspension (including setting and sagging) and whether or not there are any body accessory parts installed that increase the initial load around the rear.
*Because of the characteristics of the product, the angle of the vehicle body when parked will be raised after installation.Always park with the steering wheel turned to the left and the vehicle tilted to the left.Check the slope of the road surface and the surrounding conditions carefully, and never park the vehicle in a place where it will lean to the right.Special care is required when installing a rear box.
*When installing the product, be sure to have the service manual specified by the vehicle manufacturer and the specified tools (commercially available tools are also acceptable).
*"Rear Low Down Link Rod" is a product name.Some products may have different shapes.
*There may be changes in product specifications due to the manufacturer's reasons.
.
"The feeling of security that comes from knowing that you can reach your feet on the bike.
Rear lowering link rod for improved footing.
Developed by applying DAYTONA's know-how, calculating the link ratio for each model and repeating actual driving tests!
It is possible to improve the lightness and the footing when riding on-road without losing the maneuverability.
This is a bolt-on design, so you only need to replace the stock link rod (or link plate)!
Compatible with stock side stand.
Sufficient strength and low price are realized.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
New Custom Articles
