CLEVERWOLF 's Tank Cover has already been installed so I cut it by myself so that it will not overlap. Large satisfaction with Hold feeling as reputed?
View Detail
54.8 ~ USD (8,141 JPY) 59.24 USD Save 7%
Webike Point: +81~ pt
(0.54 USD)
Delivery Information
-
Please select product form first.
Product detail
**Stomp Grip adhesive needs 24 hours to stabilize its adhesive strength.Full adhesion requires 72 hours.If you use the product before it is fully bonded, it may peel off or shift.
*Please pay special attention to the use of stomp grips that are attached to the frame surface.
*When driving a vehicle equipped with stomp grips, please wear clothing that does not allow your bare skin to come into direct contact with the stomp grips.If you drive with your bare skin in direct contact with the product, you may suffer from abrasions and other injuries.
The adhesive used in Stomp Grip is very strong.If you remove the stomp grips forcibly, the paint may come off with them.To remove the Stomp Grip, heat it up with a heat gun or the like to reduce its adhesive strength, and then remove it.
(It depends on the paint condition of the vehicle, but older vehicles need special attention)
*We do not accept returns or exchanges after the package has been opened.
*Because of the shared stock system with the store, there is the case that it is out of stock by the purchase timing regardless of the stock display.If the item is not in stock, we will order it for you.
*Please make sure to check the year of your vehicle before ordering..
While most of the products are just a sticker to prevent scratches on the body, the Stomp Grip is a riding support gear that has evolved into a functional part to reduce fatigue.
From the street to the circuit, it is highly supported in various situations.
Originally developed elastomer material, strong 3M adhesive is used for the adhesive.
The pad keeps its original gripping power without shifting even in hard riding scenes.
MADE IN THE USA!
Stomp Grip is used by top racers and stunt riders all over the world.
It is very popular in the circuit and the street in Japan.
Stomp Grip users are increasing all over the world.
[stomping on stomp grips]
1. Clean the surface to be applied.
(When using clear, please remove dirt and water stains with compound before starting work)
2. Degrease the surface to be applied.
3. Perform positioning.
4. Apply from the edge so that air does not enter.Peel off the backing paper while pasting.
(If you use a clear sheet, apply it slowly and carefully, taking your time from the edge.It is possible to stick it beautifully without air entering.)
The adhesive of Stomp Grip needs 24 hours to stabilize the adhesive strength.
Full adhesion requires 72 hours.
If you use the product before it is fully bonded, it may peel off or shift.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
![whole [Color] It's not Clear.](https://global-fs.webike-cdn.net/photo/impression/51/51e90f8b9d6816d93e66eb7393a297fbM.jpg)
Fits:HONDA CBR1000RR 08-11
Fits:HONDA CBR1000RR 08-11
Aug 5, 2016
Before installation, Tank sticking surface is degreased with Silicon-offSpray and Dustcloth.
Since Dust will remain when wiping with Dustcloth, I skipped Dust in Air duster.
Position easily on the tank before peeling the backing paper.
Peel off the mount little by little from the edge and paste from the front side of the tank toward the side of the Seat while pulling the air out.
It is better not to take a ride for at least one day because of adhesion of adhesive Seat after pasting.
As for appearance, only Tank part became look like MotoGP or Machine.
I am looking forward to the effect after riding.
Helpful?
Apr 17, 2022
The base paper is very difficult to peel off, and the adhesive on the Body side almost peels off if it is poorly untangled.
Also, the edges are peeled off at first, and then gradually turned up to a large size and pasted on, which also requires a lot of strength.
The feel is good, except for the sticking.
Helpful?
Fits:YAMAHA YZF-R6 08-15
Mar 26, 2022
For installation, degrease the surface to be affixed.
The paper attached to the adhesive surface should not be removed all at once, but rather, about one-fifth of it should be peeled off and applied repeatedly. Do not touch it for 24 hours after applying it.
The knee grip becomes easier, so the fatigue level is completely different. It is very easy to hold my body when accelerating and breaking.
It would be great if I didn't mind those warts.
Helpful?
Feb 27, 2022
The knee grip is also very comfortable and I use it every time I buy a motorcycle.
View DetailHelpful?
New Custom Articles
