Forged Aluminum Wheels M7RS Genesi Front and Rear Set

[Size / weight]
■Front
・Size: 3.50-17
・Weight: 3.64kg
■Rear
・Size: 5.50-17
・Weight: 5.48kg

[Product Category]
・Aluminum wheels
・For Street (High Performance Street Wheels)
*Racing use possible

[Material]
・Aluminum for forging (Al) AA6009 / T1
・A7075 series (Super duralumin)

[Finish] High quality urethane paint

[Design]
・7-spoke
Directly adopts the racing wheel design.

[Safety Standards]
・[STREET WHEEL]
It is a product that has passed the safety level based on the JWL standard.(JWL standard compliant product)

[manufacturing process]
・Forging method (Forged)
・Hot forging
・Exclusive Mold
・Multi-directional simultaneous press forging (Total Formed Forging System)
・15, 000ton class forging press
・Final shape cutting and finishing by CNC (computer controlled)

[Components] Aluminum air valve (L (90 degree) specification)

[Country of Origin] Italy (MADE IN ITALY)

[Manufacturers]
・Brembo S.p.A.
・Via Brembo.25 24035 CURNO(BG)Italy

[Applicable sprocket type]
・Type A
・Standard size: A532.48
・Recommended size: A530.48

**Price includes front and rear wheels and accessories.
*The design is slightly different between Street and Racing to adapt to the purpose of use.
*Special sprockets are sold separately.
*This wheel can be used for racing.For more information, please refer to the dedicated page for racing wheels.
[Display of wheel weight (measurement conditions)]
*The wheel weight displayed is the "wheel assembly weight" which includes the weight of fitting parts such as bearings, side collars and sprocket holders.
*Weights are measured on the assumption that the same components are used for both the stock wheel and the Marchesini wheel - the weight of the wheel alone, without the components, does not allow a proper comparison due to the differences in construction.
*In order to accurately compare the weight of the wheel with that of the stock-installed wheel, the weight measurement is standardized to the following conditions.
*[FRONT WHEEL] = measurement of the weight with the wheel removed from the vehicle body and the tire and disc rotor removed.
*[REAR WHEEL] = measurement of the weight with the wheel removed from the vehicle body and the tire, disc rotor and sprocket removed.
*"OEM ratio" is the ratio of weight reduction possible when comparing the weight of a Marchesini wheel to the weight of a stock (OEM) wheel under the same measurement conditions.(The larger the minus value, the lighter the wheel is compared to the stock wheel.)
[About the sprockets]
*For street use, unless there is a significant change in the tire size to be combined with the wheel change, the "stock standard size sprocket" should be selected as a general rule.
*Even if the rear tire size is changed by changing the wheel, the next change is considered as no change in tire diameter.
*170/60ZR17 ⇔ 180/55ZR17 ⇔ 190/50ZR17.
*The recommended sprocket size is different from the stock standard size in some models, but these models have a relatively large change in tire diameter by changing wheels and tires.The method for selecting the recommended size uses sample data calculated based on the ratio between the diameter of the tire that was installed before replacement and the diameter of the tire to be newly installed.
[About Metal series (gold anodized finish) products]
Anodized aluminum products are finished by coloring with anodizing.
Please understand that anodizing has the following characteristics and weak points.
●Machining marks caused by cutting
The wheel is produced by machining.
Since products as large as wheels are processed and finished by "total machining, " there will be fine "cutting marks" on the products.
We evaluate such "cutting marks" in terms of finishing, considering the wheel as a functional part.
●Anodized aluminum treatment
Anodizing is applied as a finishing of the wheels.
Anodizing is a process that creates an anodic oxide film on the aluminum surface, which has the advantage of improving corrosion and corrosion resistance, but because it is a process that applies a film to the surface of the product, it cannot hide the "cutting marks" described in the previous section, unlike a painted finish.
Also, unlike a painted finish, the color of the product may vary in shade and unevenness.
●Product quality criteria
Anodized aluminum products are delivered after being evaluated in consideration of the anodized aluminum products characteristics.
The products delivered are basically in the range of good products.

*The images include other colors and products.
*There may be changes in product specifications due to the manufacturer's reasons.

* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed..