ManufacturerSite has installation examples for each car model, so I used that as a reference.
The Kit does not include the terminals and resistors necessary for coupling, so you will need to make your own arrangements for these.
Also, there was a mistake in the Wiring color in the Manufacturer's installation example, so it was not easy to install.
Although Neutral is said to be GreenWhite in the Manufacturer, it is really light blue.
If your car does not have the kit, you will need to use the Skill for installation.
SPI-110 Shift Position Indicator [5-Gear to 6-Gear / for 12V]
Product # 11014
3.9 (16 reviews)- Instock
87.86 USD (13,036 JPY)
Delivery Information
In Stock : 2 left, Ships within 24 hours.
Estimated arrival date around
Product detail
[Specification]
・Rated voltage: DC12V
・Outer diameter dimension: W25.5mm x H30.5mm x D15.5mm (*excluding protruding parts)
[Components]
・Main unit x 1
・Double-sided tape x 2 (1mm thick, 2mm thick, 1 each) (*Use 1 tape for temporary fixing during setting.)
・Instruction manual
**This product is for 12V motorcycles (battery-powered vehicles) only.
*This product cannot be installed on vehicles with point ignition type.The high voltage generated when the key is turned from ON to OFF may short-circuit the SPI unit and cause a failure.(Ex) HONDA CB400FOUR
In the case of HONDA CB400FOUR, there is a case that SPI was short-circuited because 65V (+20V, -45V) were generated at the moment when the key was turned from ON to OFF.
*This product is only for motorcycles with electric speedometers.When installing on a mechanical speedometer (meter cable type), please purchase the optional pulse generator PG-110.
*When the clutch is depressed while driving, the display shows a gear other than the one in which the clutch is engaged, but this is not a malfunction.
*Prioritize safety while driving and do not be careless in front.
*Please do not use non-resistive spark plugs.If you use a plug without resistance, noise may be generated and the rotation signal may not be input correctly, so please use a spark plug with resistance.
*Please put the attached double-sided tape on the back side of this product to prevent water from entering because there is a switch.
*Install the product correctly according to the instruction manual.Improper installation may result in fire or equipment damage.
*After installing this product, periodically inspect it to see if any parts have fallen off.
*PROTEC is not responsible for any damage or accident caused by the use of this product.
*Protec is not responsible for any labor charges for removal or other expenses incurred during repair.
*All vehicles that have been tested by Protec are stock.There is a possibility that a problem may occur if the vehicle is equipped with aftermarket parts other than stock parts.
*This product can be used for vehicles that are not listed in the compatibility information below.Please refer to the list for the required parts.
*Please refer to the service manual of your motorcycle to confirm the respective wiring before installation.
*Some Harley-Davidson [TC96 '05] injection models do not work with SPI.If you are planning to install the product, please contact PROTEC before purchase.
*For other Harley-Davidson models, it can be installed on with the SPI-110 and optional PG-110 + PG-220.
.
●Digital display
Suitable for vehicles with electric speedometer.
*Mechanical speedometer (meter cable type) and mechanical tachometer (without tachometer) models require a optional part separately.
●Compact design!
The main unit dimensions are W25.5mm x H30.5mm x D15.5mm (excluding protruding parts), a compact design that does not interfere with installation around the meter.
●LED display for high visibility!
Equipped with a dimmer sensor [automatic dimming function].The brightness of the LED is automatically adjusted to be brighter in the daytime and darker at night to improve the visibility of the digital numerals.
●Equipped with a shift up indicator!
Since the rpm can be set arbitrarily, it can be used for everything from narrowing to preventing over-revving.The blue LED will light up when the rotation is higher than the set value.*You can re-register as many times as you like.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.