Since my friend got a second-hand Engine with Y back and low back, it is installed in Base car
It was obviously strange, so I got OH, the Piston Pin 's Clip was disconnected, Piston Pin jumped out, Cylinder had an unrecoverable Wound, so purchase Cylinder and Piston's Set
It is said that the cooling effect is higher than HCylinder, but there is no clear effect
Piston also makes it easy for Wound to enter the groove where Piston Pin's Clip fits, whether the material is not good
With this, I felt that Piston Pin 's Clip is off the shelf
My MONKEY is also a pretty old Piston in Mukawa, but there is not such a thing, as it is rumored, is there a difficulty with Materials recently Makekawa (^ ^ ;;
191.84 USD (28,500 JPY)
Webike Point: +285 pt
(1.91 USD)
Delivery Information
This item is discontinued.
FITMENT
HONDA
Open Fit Model Information Table
-
MAGNA50
(AC13-1000010-)
-
XR50R
(AE03-1000001-)
-
CL50
(CD50-4000001-)
-
CD50
(CD50-1500001-)
See all
HONDA
Product detail
88cc
Bore Diameter: 52mm
Compression Ratio: 11.5:1
Cylinder: V Cylinder
Included Camshaft: Sports Camshaft
*
*Corresponding Vehicle
Excluding CUB50 C50-8000026-8985028 vehicle, FI Vehicle (C50-9000001-9499999/C50-0200001-0999999/C50-2100001-2299999/AA01-1000001-1699999)
Excluding Little CUB FI Vehicle (C50-4300001-/AA01-3000001-3999999)
*It is not mountable other than STD head.
*It requires cutting of the cylinder because it interfere to the cylinder in case of mounting STD carburetor to a V cylinder..
For cylinder, it is available to temperature sensor so by purchasing thermometer separately , possible to measure cylinder temperature..
Set for NORMAL HEAD 88 cc Big bore piston, Aluminum steel sleeve cylinder, Sports camshafts, Gaskets
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:HONDA DAX 12V (AB26-1000001-), HONDA JAZZ (AC09-1000030-), HONDA CUB90 (C.D.I. ignition vehicle), HONDA LITTLE CUB , HONDA GIORCUB (AF53-1000001-)
May 23, 2016
Helpful?
Fits:HONDA MONKEY (Z50J-1000001-1510400) 6V, HONDA DAX (ST50-1000001-6346265) 6V, HONDA GORILLA (Z50J-1000001-1510400), HONDA BENLY50CD50 (CD50-1300001-1330600), HONDA SUPER CUB 50 (C50-3000001-4223783) Point Ignition Vehicle
Installed on: HONDA GORILLA
Aug 24, 2023
The quality was great as always from SP Takegawa, will be installing soon once more parts arrive. Thank you as always for the quality products.
View Detail
Helpful?
Fits:HONDA MONKEY (Z50J-1000001-1510400) 6V, HONDA DAX (ST50-1000001-6346265) 6V, HONDA GORILLA (Z50J-1000001-1510400), HONDA BENLY50CD50 (CD50-1300001-1330600), HONDA SUPER CUB 50 (C50-3000001-4223783) Point Ignition Vehicle
Mar 11, 2021
Engine Displacement VolumeUp from 72cc to 88cc!
I changed the spec. to SP Takekawa SSTage Bore Up Kit 88cc this time because the 72cc stalls on a little slope! It was almost the same work as when I changed to 72cc before, but the instruction manual was very easy to follow and I was able to work on it like a plastic model! I was not able to run the carburetor at full throttle during the break-in period, so I did not change the setting from 72cc, but it is very strong and feels good! I can't wait to run it at full throttle and get it set up!
View DetailHelpful?
Aug 16, 2016
I think that it can be assembled without problems if the assembly is carried out according to the instruction manual.
Torque wrench is mandatory
I also have something to help with Engine Stand.
Torque feeling rises considerably.
Change to FSprocket 14 → 16 T
Carburetor, Exhaust System is in NORMAL state about 70 km.
MJ is a good feeling about 80
Helpful?
New Custom Articles
