Since a Handle-stopper position was different and a Radiator hit a Stainless when it exchanges for the Stainless of ZX10, it purchased.After
attachment, when the piece angle check was carried out, although lost, the hit to a Radiator managed with the Handle lock having lost its effect, the small turn lost its effect on the time, and it removed it sadly.I think that it is good for using it in the
Circuit etc.
38.66 USD (5,743 JPY)
Webike Point: +57 pt
(0.38 USD)
Delivery Information
This item is discontinued.
FITMENT
KAWASAKI
Open Fit Model Information Table
-
GPZ900R
-
Zephyr 750
-
Zephyr 400
-
Zephyr 1100
See all
KAWASAKI
Product detail
GPZ for Zephyr series
Color: Black
Material: duralumin
*
.
*Images are for reference only..
* The image is only for reference. The image shown may differ from the actual product.
Suitable for down handle and steering damper installation.
It can be bolted on to the boss part of the stock vehicle body.
The angle is 15° on one side and 30° on both sides compared to the stock.
It can be used on other models as a universal, but please judge the model by the customer.
The groove width is 5mm.
If the fan-shaped plate on the frame side is 5mm, it can be used.
The bolt length may need to be changed.Please prepare the M5 bolt of the length other than the included one by the customer.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:KAWASAKI , KAWASAKI , KAWASAKI , KAWASAKI , KAWASAKI
Jul 5, 2013
Helpful?
Fits:KAWASAKI , KAWASAKI , KAWASAKI , KAWASAKI , KAWASAKI
Feb 14, 2012
This product is easy to attach and, moreover, can reduce the piece angle of a handle by no less than 15 degrees.
Although the point that it becomes impossible to use a handle stopper is a difficulty, as goods, it is very good.
Helpful?
Fits:KAWASAKI , KAWASAKI , KAWASAKI , KAWASAKI , KAWASAKI
Dec 5, 2011
In separate-handle-izing Ninja400R, the method of tampering with the piece angle of a handle was chosen.
Since the handle stopper for Ninja400R was not found at that time, the object for the Ninja250R here was purchased, processed and attached.
A piece angle becomes shallow very much, and even if it introduced a separate handle, it stopped interfering.
They are the goods which were very helpful!
Helpful?
New Custom Articles
