I bought Inner wire from KITACO.
I take it with me in case of emergencies on the way to touring (I don't want to use it).
The area of the bag is quite a lot, but it is very thin because it is Wire, so I think that it can fit under the Seat if it is a Scooter, and I think that it can fit under the Seat if it is a Motorcycle, and I think that it can be stored in Dee Bucketc. without taking up space.
There is enough length, and there are two kinds of thickness, a thick 2mm length of 1.5m for Clutch and a 1.5mm length of 2m for Slot.
1.As for 5mm, LWrench, Cable end and Screw are also Quantity.:It was in the Set, and the one of 2mm longitude is only Wire, too.:I wanted it to be Set.
If you are in the middle of touring, you may need a tool to cut the wire?
When you use it for the front brake of the old car, it stretches and it becomes Large strange. When it is used for the front brake of an old car, it stretches and becomes Large strange.
7.16 ~ USD (1,064 JPY) 7.4 USD Save 3%
Delivery Information
-
Please select product form first.
Product detail
■Set contents
・Steel / Zinc plated inner wire (Φ1.5 x 2m / one side cable end soldered) x 1
・Cable end set (6 x 6 / holder side for throttle) x 1
・L-shape wrench, enamel screw (set screw) included
Emergency wire set to respond to sudden wire trouble in the touring destination.
The use of steel wire suitable for solder fixation enables long term use by solder fixation.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Oct 24, 2021
Sep 6, 2020
The wire on the Large old TL125 OEM Throttle that I was using for MONKEY broke so I repaired it here.
At this time, I thought about using a high throttle kit outside the company, but the cost is much cheaper and the only thing left to do is to do it yourself. (Lol)
All you have to do is cut the broken wire to length and secure it with the attached screw.
As a working hang, it is best to use a wire cutter that can cut well.
If you don't have it, you can also cut it with Nipper, but it takes a lot of power and the cutting surface becomes easy to fray.
Putting it through Outer and ThailandCo before cutting will save you a lot of trouble later.
But if you pour solder on the cut end, I think it can be used permanently.
On a side note …
Because the overall length of the Thailand coil is a little long and the head of Screw was 0.2?
So I used a sander to shorten the length a bit and delivered it.
It's not impossible to deal with Trouble at the Touring Destination, but if you are worried about it, I think it's wise to carry a spare.
Jul 20, 2010
It purchased by the thought which clutches even at straws in order not to obtain a wire by a discontinued car.
What is necessary is to take out an inner wire and just to cut to die length together.
If it fixes with a screw lock or solder although it is with the object for emergencies, long-term use is also taken as it is possible, and it has written on the opinion.
it cuts in order to unite die length, but power is needed very much -- probably, only it also has reinforcement.
In my case, it remained very well, since the drum for clutches was also sold, it purchased, and it was able to use also for the clutch wire.
New Custom Articles
