- Fits:
- HONDA CB400 FOUR(Air cooled) 75-77 F1 398cc
- HONDA CB400 FOUR(Air cooled) 75-77 F2 408cc
- HONDA CB400 FOUR(Air cooled) 75-77 F2 398cc
- HONDA CB400 FOUR(Air cooled) 75-77 F1 408cc
First the good: swingarm is well constructed, attractive and fits well. It looks quite racey installed, and if tweaked (see "the bad"), it has zero play in the pivot. Comes with needle bearings rather...Read More - Fits:
- HONDA CB400F 74-77
I was going to add a coney etc. as it is an old car.I was worried at the pass, so I bought thisRead More - Fits:
- HONDA Super HAWK250 77-79
- HONDA Hawk III CB400N 77-79
- HONDA
- HONDA Hawk II CB400T 77-79
- HONDA CB350 72-74
- ...and more.
Chain pull line at the center of Axle Shaft is Quantity.:Pair (for Left and Right) It was off byThis will not produce a chain line.I'd like to think I just happened to be on the wrong side of the line...Read More - Fits:
- HONDA CB400 Fore (air-cooled) 75-77
- HONDA CB400 Fore (air-cooled) 75-77
- HONDA CB400 Fore (air-cooled) 75-77
- HONDA CB400 Fore (air-cooled) 75-77
The motorcycle was not equipped with a Washer and it was rattling, but it was settled and became One point because it is Stainless Steel.Read More - Fits:
- HONDA CB400 FOUR(Air cooled) 75-77 F1 398cc
- HONDA CB400 FOUR(Air cooled) 75-77 F1 408cc
- HONDA CB400 FOUR(Air cooled) 75-77 F2 398cc
- HONDA CB400 FOUR(Air cooled) 75-77 F2 408cc
InnerSeal ordered OEM and Again's was a lot cheaper than us for Dust Seal So I chose this one There is nothing wrong with the texture and installation You can't go wrong with this one as it's from the...Read More - Fits:
- HONDA
Springs arrived quickley and safety to me in Australia, well packed. Springs perform well at reducing front end "bounce" but are still very firm.
I am happy with this product.Read More - Fits:
- HONDA CB400 FOUR(Air cooled) 75-77 F1 398cc
- HONDA CB400 FOUR(Air cooled) 75-77 F2 408cc
- HONDA CB400 FOUR(Air cooled) 75-77 F2 398cc
- HONDA CB400 FOUR(Air cooled) 75-77 F1 408cc
My first time shopping via Web!ke and so far a fantastic experience.
Great packaging and fast shipment from Japan.
The rearsets (I chose black) look sexy and were a perfect and easy install and fi...Read More - Fits:
- HONDA NSR250R [MC16]. 86
- HONDA NSR250R SP [MC28]. 96
- HONDA NSR250R SP [MC28]. 95
- HONDA NSR250R SP [MC28]. 94
- HONDA NSR250R SP [MC21]. 93
- ...and more.
The OEM footpeg of the VTR is in a slightly higher position, and recently, when I got on for a long time I felt a bit cramped, so I bought this product I was curious about before.Before installation, ...Read More - Fits:
- HONDA CB400FOUR (air-cooled)
- KAWASAKI Z400FX/Z400J
- SUZUKI GS400E
Items of this price with this price range are plating thin or cheesy things so many things I have only seen things hesitant to install on my Motorcycle, but I got lost but purchased because it was ine...Read More - Fits:
- HONDA CB400 FOUR(Air cooled) 75-77 F1 398cc
- HONDA CB400 FOUR(Air cooled) 75-77 F1 408cc
- HONDA CB400 FOUR(Air cooled) 75-77 F2 398cc
- HONDA CB400 FOUR(Air cooled) 75-77 F2 408cc
realy nice torque rod, i bought it for my honda cb350f, it is the same but has has been chromed, i will accept that, would buy again as i have more than qty1 cb350f.Read More - Fits:
- HONDA CB350 72-74
- HONDA CB400 Fore (air-cooled) 75-77
- HONDA CB400 Fore (air-cooled) 75-77
- HONDA CB400 Fore (air-cooled) 75-77
- HONDA CB400 Fore (air-cooled) 75-77
BRC Step Aluminum Collar (Rear Sets
I bought a set of these collars and found they are well made and exaxt match to the original Honda collars.Read More - Fits:
- HONDA CB400Four [NC36] 1998 98 [Frame No.]NC36-1100001 or later
- HONDA CBR250RR [MC22] 94 [Frame No.]MC22-1100001 or later
- HONDA CBR250RR [MC22] 93 [Frame No.]MC22-1050001 to 1056770
- HONDA CBR250RR [MC22] 92 [Frame No.]MC22-1050001 to 1056770
- HONDA CBR250RR [MC22] 91 [Frame No.]MC22-1000001 to 1020576
- ...and more.
I think that the original use is due to Position change, but we bought it to earn even a little bank angle.NORMAL is a VTR 250 easy to ground the footpeg, but it will be quite useful if attached here....Read More - Fits:
- HONDA CB400 Fore (air-cooled) 75-77
- HONDA CB350 72-74
- HONDA CB400 Fore (air-cooled) 75-77
- HONDA CB400 Fore (air-cooled) 75-77
- HONDA CB400 Fore (air-cooled) 75-77
I needed a rear axle for my restoration project, 1972 CB350 Twin. Since all used ones were scratch rusted, etc. and no NOS axles could be located, I decided to purchase one of these polished Stainless...Read More - Fits:
- HONDA NSR250R [MC16]. 86
- HONDA NSR250R SP [MC28]. 96
- HONDA NSR250R SP [MC28]. 95
- HONDA NSR250R SP [MC28]. 94
- HONDA NSR250R SP [MC21]. 93
- ...and more.
At the Step of the NORMAL, the ankle by the side of a Brake wanted to have been narrow and to make a Step somewhat high, and purchased the goods here.attachment was attached in about 15 minutes.Althou...Read More - Fits:
- HONDA CB400Four [NC36] 1998 98 [Frame No.]NC36-1100001 or later
- HONDA CBR250RR [MC22] 94 [Frame No.]MC22-1100001 or later
- HONDA CBR250RR [MC22] 93 [Frame No.]MC22-1050001 to 1056770
- HONDA CBR250RR [MC22] 92 [Frame No.]MC22-1050001 to 1056770
- HONDA CBR250RR [MC22] 91 [Frame No.]MC22-1000001 to 1020576
- ...and more.
It ended with easy attachment for a short time.
The > Setting sat down repeatedly and found out the better position as its Riding Position in consideration of spatial relationship with a Pedal. [ ]
...Read More - Fits:
- HONDA NSR250R [MC16]. 86
- HONDA NSR250R SP [MC28]. 96
- HONDA NSR250R SP [MC28]. 95
- HONDA NSR250R SP [MC28]. 94
- HONDA NSR250R SP [MC21]. 93
- ...and more.
An angle is changed freely and the optimal Position can be chosen.
It is kana with the high amount of money somewhat?
Read More - Fits:
- HONDA NSR250R [MC16]. 86
- HONDA NSR250R SP [MC28]. 96
- HONDA NSR250R SP [MC28]. 95
- HONDA NSR250R SP [MC28]. 94
- HONDA NSR250R SP [MC21]. 93
- ...and more.
There is a melon of this product in the ability to choose arbitrary Step positions.
Since I did not want to rub a Step at the time of a bank, I chose the position which becomes the highest.
Since ...Read More - Fits:
- HONDA NSR250R [MC16]. 86
- HONDA NSR250R SP [MC28]. 96
- HONDA NSR250R SP [MC28]. 95
- HONDA NSR250R SP [MC28]. 94
- HONDA NSR250R SP [MC21]. 93
- ...and more.
Since the Shift pedal had a narrow feeling, it equipped.
It is thought that the operating attitude became easy since the Position was adjusted to oneself liking, and a long distance also became somew...Read More - Fits:
- HONDA CB400Four [NC36] 1998 98 [Frame No.]NC36-1100001 or later
- HONDA CBR250RR [MC22] 94 [Frame No.]MC22-1100001 or later
- HONDA CBR250RR [MC22] 93 [Frame No.]MC22-1050001 to 1056770
- HONDA CBR250RR [MC22] 92 [Frame No.]MC22-1050001 to 1056770
- HONDA CBR250RR [MC22] 91 [Frame No.]MC22-1000001 to 1020576
- ...and more.
When having ridden with the Sneakers, the spatial relationship of a Step and a Pedal was good, but since the Step and the Pedal became far for a while merely when the Boots was used, it purchases.
...Read More - Fits:
- HONDA NSR250R [MC16]. 86
- HONDA NSR250R SP [MC28]. 96
- HONDA NSR250R SP [MC28]. 95
- HONDA NSR250R SP [MC28]. 94
- HONDA NSR250R SP [MC21]. 93
- ...and more.
[a Webike Monitor] -- although use is also a cause of the shoes carried out -- the NORMAL -- if -- when the distance of a Shift pedal and a Step adjusted the position of the Pedal soon, since it was o...Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING