It is an exchange from the company StraightOil cooler.
Compared to Straight type, the oil temperature during traveling is lower by 5-10 degrees, and the drop in oil temperature at the beginning of running is also fast.
Compared with OEM, it is 10 to 20 degrees lower when driving, and it is satisfactory.
However, although there may be individual differences, Side color is about 3 mm longer than Core Body, so it was not possible to enter without hammering with Hammer, so I will make 4 stars.
946.09 USD (140,378 JPY) 1,010.94 USD Save 6%
Delivery Information
-
Please select product form first.
Product detail
Hose routing:Stock
Size: #8, 11", 16-way
[hose fitting data]
・Long hose (core side: 90° / out side: 45°)
・Short hose (core side: 90° / out side: 45°)
[Set components]
・Oil cooler core
・Hose
・Bracket
・Extraction
**Install the oil line so that it does not come into contact with the engine or exhaust.
*The setting is based on the stock exhaust.
*This product cannot be installed on XJR1200R (with cowl) because it comes in contact with the cowl.
*Cooling effect may be inferior to that of the stock oil cooler at speeds below approx. 100km/h, depending on driving conditions and weather conditions..
* The image is only for reference. The image shown may differ from the actual product.
[round oil cooler]
Active Alls Round Oil Cooler with light weight, compact size and high performance.
Not only the fitting but also the core itself is made by Earl's, a reliable and proven company.You can experience thin, lightweight and high performance.
A wide range of core sizes and colors are available.Please select the one that best suits your vehicle.
[Product Features]
(1) Improving cooling effect by 35% compared to straight cores!
(2) Front projection area reduced by approx. 7% compared to a straight core of the same inch and the same number of stages
(3) The weight is also significantly reduced by about 40 percent with convesion of compactness compared to a straight core of the same inch and the same number of stages!
[Color]
Two colors lineup to choose from (silver / black)
[core (EARLS)]
If the cooling air entering from the front of the core can be smoothly released to the rear, the cooling effect will inevitably be improved.
At first glance, it is often thought that a thicker core has a higher cooling rate, but if the ventilation is poor, heat accumulation is easily induced and it is counterproductive.
This round core has a thin thickness to improve ventilation and achieve a high cooling rate.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.