?
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
I replaced my Normal chainCover because it was cracked, and I was looking for something sturdier than Normal with a nice shape, so I went with this one.
WM has been specializing in SRParts for a long time and has been making parts for a long time. We are sure that this is the right part for you.
good point
It looks beautiful and shiny because of buffing.
■Material:It is sturdy because it is Stainless.
The Chain is easy to see, which improves serviceability.
A bad point
If dirt gets on the Cover, it will be noticeable. Please clean it frequently.
I'm happy with the result, because it's easier to maintain and dress up the chain.
There are some custom parts that remove the chain cover, but it will affect the durability of the chain if there is no cover on the chain.
Fits: YAMAHA SR500 ALL MODEL, YAMAHA SR400 ALL MODEL
Gives a slim look and is much lighter than the original chain case. Also clears aftermarket shocks if needed.Looks great too.View Detail
Fits: YAMAHA SR500 ALL MODEL, YAMAHA SR400 ALL MODEL
I think that OEM is more beautiful for the whole Line continuing from the Sprocket cover, but it is also light appearance in Slim and still looks Parenthesis. The mounting on the DrivenSprocket side is a long hole so you can adjust the height (Picture is the highest position)
Sprocket cover side installation Bolt, RubberDamper is OEM diversion, but it was able to substitute UniversalH Type RubberFor M6
In one point, fixed Nut of Sprocket and fixed Bolt of this product seemed to hit the interference Limit, so I caught a piece of WasherView Detail
Fits: YAMAHA SR500 ALL MODEL, YAMAHA SR400 ALL MODEL
compared with a NORMAL, it is light, and also feel appearance refreshed and a STAINLESS STEEL is also beautiful --
-- it is good to be attached simply above all.It became easy, and he also bought cleaning of the
Chain and it was good.View Detail
Fits: YAMAHA SR500 ALL MODEL, YAMAHA SR400 ALL MODEL
There is intensity by a STAINLESS STEEL, and since there are no worries about rust and appearance felt it refreshed, it is very pleasing.If the
OHLINS etc. are pure thicker Springs, a pure Chain case will interfere in them, but it does not interfere in this Chain case.
It is a Manufacturer thing truly, and the earthquake-proof thing is considered and it is a Bolt bundle of three piece without using welding daringly.It is recommended.View Detail
Fits: YAMAHA SR500 ALL MODEL, YAMAHA SR400 ALL MODEL
When ohlins suspension was attached, since it interfered, the chain case of normal was removed.
if, as for weak me of mind, a chain goes out -- a guide peg -- being torn to pieces -- an automobile inspection -- not passing -- the guess was believed and it arrived at this chain case.
After attaching, even if the person to whom the guide peg was torn to pieces in SR riding had not heard it and there was no chain case, it got to know that an automobile inspection passed, but they were the goods which existed when it was and which may come out, and may not become obstructive, either but may glitter.
It is begun to run chain oil at the time of carrying out re-spread, and the oil scatter to an ankle is pressed down.View Detail
Fits: YAMAHA SR500 ALL MODEL, YAMAHA SR400 ALL MODEL
Gives a slim look and is much lighter than the original chain case. Also clears aftermarket shocks if needed.Looks great too.View Detail
Fits: YAMAHA SR500 ALL MODEL, YAMAHA SR400 ALL MODEL
I think that OEM is more beautiful for the whole Line continuing from the Sprocket cover, but it is also light appearance in Slim and still looks Parenthesis. The mounting on the DrivenSprocket side is a long hole so you can adjust the height (Picture is the highest position)
Sprocket cover side installation Bolt, RubberDamper is OEM diversion, but it was able to substitute UniversalH Type RubberFor M6
In one point, fixed Nut of Sprocket and fixed Bolt of this product seemed to hit the interference Limit, so I caught a piece of WasherView Detail
Fits: YAMAHA SR500 ALL MODEL, YAMAHA SR400 ALL MODEL
compared with a NORMAL, it is light, and also feel appearance refreshed and a STAINLESS STEEL is also beautiful --
-- it is good to be attached simply above all.It became easy, and he also bought cleaning of the
Chain and it was good.View Detail
Fits: YAMAHA SR500 ALL MODEL, YAMAHA SR400 ALL MODEL
There is intensity by a STAINLESS STEEL, and since there are no worries about rust and appearance felt it refreshed, it is very pleasing.If the
OHLINS etc. are pure thicker Springs, a pure Chain case will interfere in them, but it does not interfere in this Chain case.
It is a Manufacturer thing truly, and the earthquake-proof thing is considered and it is a Bolt bundle of three piece without using welding daringly.It is recommended.View Detail
Fits: YAMAHA SR500 ALL MODEL, YAMAHA SR400 ALL MODEL
When ohlins suspension was attached, since it interfered, the chain case of normal was removed.
if, as for weak me of mind, a chain goes out -- a guide peg -- being torn to pieces -- an automobile inspection -- not passing -- the guess was believed and it arrived at this chain case.
After attaching, even if the person to whom the guide peg was torn to pieces in SR riding had not heard it and there was no chain case, it got to know that an automobile inspection passed, but they were the goods which existed when it was and which may come out, and may not become obstructive, either but may glitter.
It is begun to run chain oil at the time of carrying out re-spread, and the oil scatter to an ankle is pressed down.View Detail
Purchased for regular replacement.
If it were a little cheaper, I could get a stable replacement...View Detail
?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Grip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING