Genuine Yamaha Dust Seal for FJR1300 2019

This bike came in with a leaky seal on the left fork which clearly needed addressing. A new set was in mind rather than changing just the one and in due course, new ring snaps were needed too. Finding the right ring snaps for this bike was pretty easy as I used the Yamaha schematics for the forks on the YZ125. The price of this ring snaps from Webike was great value and better than I thought they would be. With a few other parts in my basket, my order was placed and shipped using EMS as they get my order delivered fast. In 7 days from being shipped, the order arrived in tact and 100% perfect. These are smaller parts and were inside a made bubble wrap envelope by Webike warehouse. Good idea guys! The ring snaps did come in the standard Yamaha packets as always. They are very well made and are a rigid metal which is perfect fit with some give but not too much to become saggy and not clip correctly. No extra bits of metal or anything. Fitting was a bit of a pain but once everything was off ready to accept the seals and new ring snaps, the job was finished quickly. Very pleased with these fork seals, thank you Webike. View Detail

This was the oil seal for the front fork on the FJR1300 which also needed new dust seals. I do always replace the oil seals when it comes to any seals where possible for my own peace of mind. It just makes sense to do this. Finding the right oil seal was easy as I already had the schematic open for the FJR1300 front forks anyway. The price for the new oil seals was great value. At this price is was silly not to get them. With the other parts needed for this replacement, I had all the order shipped using EMS which are my chosen and trusted courier. My order arrived in 100% perfect condition in 7 days from being shipped. The oil seals came in the standard Yamaha packets and were also inside a nicely made bubble wrap envelope by Webike warehouse to keep them safe. The oil seals are pretty rigid if I am honest but that is not a bad thing. They are top quality oil seals which you expect from such a well respected manufacturer like Yamaha. With a tiny bit of oil to seat them easily, the job was complete and now the rear wheel moves freely and smoothly as it should. Great job guys, very pleased with this purchase. View Detail

This bike came in with a leaky seal on the left fork which clearly needed addressing. A new set was in mind rather than changing just the one and in due course, new ring snaps were needed too. Finding the right ring snaps for this bike was pretty easy as I used the Yamaha schematics for the forks on the FZ6. The price of this ring snaps from Webike was great value and better than I thought they would be. With a few other parts in my basket, my order was placed and shipped using EMS as they get my order delivered fast. In 7 days from being shipped, the order arrived in tact and 100% perfect. These are smaller parts and were inside a made bubble wrap envelope by Webike warehouse. Good idea guys! The ring snaps did come in the standard Yamaha packets as always. They are very well made and are a rigid metal which is perfect fit with some give but not too much to become saggy and not clip correctly. No extra bits of metal or anything. Fitting was a bit of a pain but once everything was off ready to accept the seals and new ring snaps, the job was finished quickly. Very pleased with these fork seals, thank you Webike. View Detail

There was some serious work needed on this older off road bike and lower forks. This is due to some oil leakage and needed addressing. I did manage to find the right part by checking Webike website and cross referencing with Yamaha schematics. The price from Webike was great value for money and better than could be sourced locally, although they did not have stock locally anyway. I also had some other parts I needed for this bike ready to ship so got them all shipped together to save some money by combining. The shipment arrived in 7 days from Wen=bike warehouse. The box was well packaged and tidy with lots of padding to keep everything safe. Not really much I can say about he gasket as it literally is that small. It looks to be a copper kind of material which will fit perfectly once torqued to the right measure. The gasket is straight and nice and flat and measured within the tolerances given by Yamaha. Great quality as can be expected from a Yamaha part. Fitting was straight forward as the lower forks were already stripped and ready fore the new parts. Very pleased with this order View Detail

This bike came in with a leaky seal on the left fork which clearly needed addressing. A new set was in mind rather than changing just the one and in due course, new circlips were needed too. Finding the right circlips for this bike was pretty easy as I used the Yamaha schematics for the forks on the MT07. The price of this circlips from Webike was great value and better than I thought they would be. With a few other parts in my basket, my order was placed and shipped using EMS as they get my order delivered fast. In 7 days from being shipped, the order arrived in tact and 100% perfect. These are smaller parts and were inside a made bubble wrap envelope by Webike warehouse. Good idea guys! The circlip did come in the standard Yamaha packets as always. They are very well made and are a rigid metal which is perfect with some give but not too much to become saggy and not clip correctly. No extra bits of metal or anything. Fitting was a bit of a pain but once everything was off ready to accept the seals and new circlips, the job was finished quickly. Very pleased with these fork seals, thank you Webike. View Detail

This classic bike came in for a few small parts that needed changing due to age related issues. The owner wanted to keep the bike as genuine as possible. One of the parts that was a little bit old and not good looking was the rear flasher stay. The old one had lost all of the black glossy paint which it originally came with. Finding the right part number for this was easier than I expected it to be. With the help of Yamaha schematics I found what I was looking for. On checking Webike website, the part was actually available and in stock in the warehouse. Great news. The price was as expected and very reasonable. Shipping was low cost using EMS and the order arrived in 7 days. The stay unit came in a see through Yamaha packet and was also inside a bubble wrap envelope. No damage to any of it. The stay itself is a stunning part, the glossy black is super shiny and both the mount holes are perfect. Quality wise, I could not ask for anything better. Fitting is easy as it is literally a bolt off bolt on part. After adding this and reattaching the flasher unit the job was complete. On to the next one View Detail

I wanted to make this little bike more presentable and a lot of the consumable parts were looking old and in need of some tlc. One of the parts that was bothering me was the kick lever cover which was worn through and hanging off. Time for a new one. Not a hard part to find as this cover does fit a lot of Yamaha models from early 70's all the way through to the newer small kids bikes. Once I found the right part number, I checked Webike website and found a really good deal for it. With some other parts for this bike already in my basket, I got them all shipped together to save money on the shipping fees. In a matter of 7 days the order arrived. The cover lever was packaged really well, it came in the standard Yamaha packaging and inside a bubble wrap envelope too. The cover itself is a moulded rubber one that is well made. The moulding is accurate and there were no extra pieces of rubber hanging off which just shows the top quality of the genuine Yamaha part. Fitting is easy as it is literally a push on fit, a tiny bit of brake cleaner helped this to be put in situ easier. The cover is a really neat and retro look but that just adds to the uniqueness of it. Very happy customer, thanks guys. View Detail

I had been looking to spruce up this Monkey when it came in with a genuine Honda Monkey emblem on the left panel of the bike. Yes, I could get them printed at a local store but why do that when you can get hold of the genuine Honda ones as cheap as this. Not a hard part to find once you know the size you need and a rough model of bike that this is for. This was the side panel emblem which did not need to be the exact same as the other side as I was also buying the right hand side anyway. Along with the right hand side decal and some other parts, all shipped together by EMS and delivered in 7 days. Everything in the package was packed neatly and securely and these were kept flat as you don't want bent emblems. They look super slick and crisp edges makes the world of difference. This genuine Honda Monkey emblem is a gorgeous black outer edge with accents of red to go with the bike's colour scheme, the inner is crisp white. It is a flat but slightly gel looking decal/emblem and all the colours are super clean too perfect. I have had some in the past for other bikes that look slightly grey on the black part but not these, perfect match for the bike colour scheme. Now this is on, the bike looks like a proper machine. Thanks Webike for providing items that are hard to get here in the UK. View Detail

I had been looking to spruce up this Monkey when it came in with a genuine Honda Monkey emblem on the right panel of the bike. Yes, I could get them printed at a local store but why do that when you can get hold of the genuine Honda ones as cheap as this. Not a hard part to find once you know the size you need and a rough model of bike that this is for. This was the side panel emblem which did not need to be the exact same as the other side as I was also buying the left hand side anyway. Along with the left hand side decal and some other parts, all shipped together by EMS and delivered in 7 days. Everything in the package was packed neatly and securely and these were kept flat as you don't want bent emblems. They look super slick and crisp edges makes the world of difference. This genuine Honda Monkey emblem is a gorgeous black outer edge with accents of red to go with the bike's colour scheme, the inner is crisp white. It is a flat but slightly gel looking decal/emblem and all the colours are super clean too perfect. I have had some in the past for other bikes that look slightly grey on the black part but not these, perfect match for the bike colour scheme. Now this is on, the bike looks like a proper machine. Thanks Webike for providing items that are hard to get here in the UK. View Detail

This was a part that needed changing on the FZ1 bike that came in for a service. The air filter was pretty bad and very dirty which was only having a negative effect on the bike's running. The correct air filter was easy to find using the tools and help section on Webike pages. I also cross referenced with Yamaha schematics for my own peace of mind. The air filter was really good value and slightly cheaper than I could source locally at my nearest Yamaha parts dealer. I chose EMS for my courier as they just get my orders delivered fast. 5 days from shipping my order arrived. Everything in the order was extra well packed with bubble wrap for security. The air filter is not a massive one especially for such a bike but you do need it to fit as it should. The old one had gotten a little funny shaped and was not sitting right. This new one however, fits perfectly. The air filter came in the usual Yamaha packaging. Fitting is easy, the filter is not doing what it is supposed to do and the bike does sound better for it. Brilliant work Webike. Happy customer. View Detail