Universal to ZrX1200DAEG
It is easier to grip the knees, but the pants will rub and Damage Processing will occur.
That's how effective it is.
35.34 USD (5,243 JPY)
Webike Point: +52 pt
(0.35 USD)
Delivery Information
-
Please select product form first.
Product detail
[Size] 4.5 x 21cm
[Type] Rectangular
[Quantity] 2 sheets
**Stomp Grip adhesive needs 24 hours to stabilize its adhesive strength.Full adhesion requires 72 hours.If you use the product before it is fully bonded, it may peel off or shift.
*Please pay special attention to the use of stomp grips that are attached to the frame surface.
*When driving a vehicle equipped with stomp grips, please wear clothing that does not allow your bare skin to come into direct contact with the stomp grips.If you drive with your bare skin in direct contact with the product, you may suffer from abrasions and other injuries.
The adhesive used in Stomp Grip is very strong.If you remove the stomp grips forcibly, the paint may come off with them.To remove the Stomp Grip, heat it up with a heat gun or the like to reduce its adhesive strength, and then remove it.
(It depends on the paint condition of the vehicle, but older vehicles need special attention)
*We do not accept returns or exchanges after the package has been opened.
*Because of the shared stock system with the store, there is the case that it is out of stock by the purchase timing regardless of the stock display.If the item is not in stock, we will order it for you.
*Please make sure to check the year of your vehicle before ordering..
While most of the products are just a sticker to prevent scratches on the body, the Stomp Grip is a riding support gear that has evolved into a functional part to reduce fatigue.
From the street to the circuit, it is highly supported in various situations.
Originally developed elastomer material, strong 3M adhesive is used for the adhesive.
The pad keeps its original gripping power without shifting even in hard riding scenes.
MADE IN THE USA!
Stomp Grip is used by top racers and stunt riders all over the world.
It is very popular in the circuit and the street in Japan.
Stomp Grip users are increasing all over the world.
[stomping on stomp grips]
1. Clean the surface to be applied.
(When using clear, please remove dirt and water stains with compound before starting work)
2. Degrease the surface to be applied.
3. Perform positioning.
4. Apply from the edge so that air does not enter.Peel off the backing paper while pasting.
(If you use a clear sheet, apply it slowly and carefully, taking your time from the edge.It is possible to stick it beautifully without air entering.)
The adhesive of Stomp Grip needs 24 hours to stabilize the adhesive strength.
Full adhesion requires 72 hours.
If you use the product before it is fully bonded, it may peel off or shift.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:Others Universal
Feb 3, 2022
Helpful?
Fits:Others Universal
Aug 19, 2021
[How is it used?
I bought it as a Pad for Knee grip of GSX-S125, and I use it after processing.
The knee grip of this model is not a tank, but a plastic part under the tank.
Moreover, that resin part is Quantity:Because it cannot be pasted on the whole surface to be divided into 1 Set of 2pcs., this product is divided into 2etc., the corner is chamfered, and it pastes and uses it.
How was your experience with it?
I think the Grip works just fine.
It is quite expensive though the product is small.
Point and hang of installation
I can't find Grip Pads that can be properly attached to the plastic part of the knee grip part of this car model, so I need to do some processing. For now, I'm satisfied with the installation of this product.
Helpful?
Fits:Others Universal
Jun 23, 2021
A little expensive, but good?
Knee grip is quite easy
It's not slippery, and even when I've got someone in the back and they've got a gap, I've put this on it and it's supported me & Sigma;d (ω*)
Helpful?
Fits:Others Universal
Feb 9, 2021
I bought the Stomp GripUniversal Product on webike!
The Stomp Grip, which is designed specifically for the vehicle, sticks to the side of the Tank, so you can't reach your knees (^-^;
Then, I bought Universal Product and attached it to the lower part of Tank.
The Stomp Grip hits from the inside of the thigh to near the knee joint, so you can now hold the knee grip without any extra force.
The price was settled with the expenditure of about 2/3 with the purchase of this Universal Product, but I thought that it would become a little cheaper if it was a domestic product.
In the Impression of the other person, it was cut and stretched to the size of personal preference, but I stretched it as it was according to the angle of the leg.
Helpful?
Fits:Others Universal
Feb 26, 2020
For car models [Color] I'm putting Clear on it, but I can't get my foot in the door for normal running, so I'm going to add it
Because it is Large size as it is, I cut and pasted it vertically Large size of the wart is a little smaller than usual, but the effect is perfect
I just think that this Large size should be a bit cheaper
Helpful?
New Custom Articles
