- NEW
- Instock
200.54 USD (29,755 JPY)
Delivery Information
In Stock : 1 left, Ships within 24 hours.
Estimated arrival date around
Product detail
[Installation time]
1.5h
[Set components]
・V-STROM250SX-exclusive 30mm lowering plate, left and right side x 1 (Material: Stainless steel)
・Short side stand x 1 (Material: Steel)
・Distance collar x 1 (Material: Aluminum)
・Special bolt for mounting x 2
・Lock Nut x 1
・Washers x 2 (Material: Steel)
**To achieve a more natural ride, the front fork projection must be changed.
*The work must be performed by a person who has maintenance skills and knowledge.
*Rear fender modification is required.
*This product is developed for installation with the stock number of drive sprockets and the stock number of links in the chain.It may not be possible to install the system if it has been changed from the stock one.
*Please use only suitable tools for this work.
*Tighten to the proper torque, and be sure to check each part for looseness of the screws and other parts before riding.
*The use of lowering kits for pillion riding and track riding is not intended.
*When the stock stand is used, the vehicle body will be in an upright position when parked.This creates a risk of falling.
*Bank sensor removal is recommended because the bank angle becomes shallower after the lowered kit is installed.
*Rearset or step position plate is recommended.
*The specifications of this product are subject to change without notice to improve performance.
*The image may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
.
This is a set of a lowering kit and a short side stand to lower the stock suspension by approx. 30mm.
It can safely support the bike body even when starting and stopping.
The center of gravity is lowered, making it easier to maneuver the bike.
A more natural ride can be achieved by adjusting the amount of front fork protrusion.
The stainless steel material is resistant to rust and corrosion, so it can be used for a long time.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.