- Sale
- Instock
74.08 USD (10,992 JPY) 131.42 USD Save 44%
Delivery Information
In Stock : 2 left, Ships within 24 hours.
Estimated arrival date around
Product detail
Color: Black
Top box compatible
**It is not completely waterproof.
*Please make sure that the engine and exhaust are sufficiently cooled down before covering them.
*By protecting the vehicle from direct sunlight, wind, rain, dust, etc., the motorcycle cover will always change over time.The color may fade depending on the usage conditions.
*If your bike is equipped with an aftermarket exhaust, the heat-resistant pad on the cover itself may not be aligned with the heat-resistant pad.
*If your bike is equipped with a windshield and the windshield is larger, the fitting may change when the windshield is covered.
*There may be changes in product specifications due to the manufacturer's reasons.
.
Various functions are positioned and sized to suit each model.
All functions are model-specific
Sewn specifically for each model for a perfect fit to the bike body.
Asymmetrical shape to match the handlebar lock condition provides secure coverage even when parking the bike.
Lock holes and fixed belt positions are set for each model.
In addition, a heat-resistant pad is sewn on the part that comes in contact with the exhaust.
Includes a windshield cover for use on bikes equipped with a windshield.
Prevents scratches when installing the cover.
・Bike cover (with windshield cover) for CT125 box only, to match handlebar lock status
・The fabric has a water pressure resistance of 20,000mm, which is 10-20 times more water-resistant than ordinary bike covers.
Seams are watertight to prevent water intrusion
・Air ventilation for better ventilation.
Exhausts moisture trapped from left and right mirrors
・One-touch belt in the lower center of the body and front and rear drawstrings for wind protection
・Sew a heat-resistant pad to endure the exhaust system
1. Air ventilation
Air vent mechanism for better ventilation.
Discharges moisture from the left and right mirrors.
2. WRLite fabric, which is 10-20 times more water-resistant than ordinary bike covers, is used.
The backside of the sewing line, which is prone to water seepage, is treated with waterproofing to prevent water infiltration.
3. Wind-resistant
A one-touch belt in the lower center of the bike and front and rear drawstrings eliminate the risk of the cover flying away in the wind.
The belt can be removed from either side.
The drawstring can be fixed with hook and loop fastener.
4. Heat-resistant
Heat-resistant pads are sewn to match the exhaust position of each model.
5. Theft-resistant
Chain holes at front and rear for large locks.
Don't bother to flip the cover to lock the chain.
6. Front-back discrimination
The front side lock hole slit is colored red and the rear side lock hole slit is colored yellow to distinguish front and rear.
MODEL PAGE LINKS
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
There are no Customer Review yet.
New Custom Articles
