177.93 USD (26,400 JPY)
Delivery Information
No Information acquired.
Product detail
■Orange LED
[Size]
・Body Size: Φ48mm
・Screw Size: M4 x 18mm
・Mounting pitch: 37mm
[Material]
・Body: Stainless steel
・Meter bracket: Steel with black paint finish
Guideline type electric tachometer: -12500rpm display
Clock: 24-hour display (non-display setting available)
Rubber mounting bracket included
**Some modification of the stock meter lower cover is required.
*Please do not install any aftermarket H.I.D kit or any other company's LED headlights or fog lamps at the same time.Some ballasts / inverters (voltage converters) emit high-voltage noise that may adversely affect digital circuits, causing product failure or malfunction.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.
*There may be changes in product specifications due to the manufacturer's reasons.
.
The "Φ48 Small DN Tachometer Kit (Orange LED)" can be installed next to the stock meter without any wiring modification
This product comes with a meter bracket that can be placed next to the stock speedometer and a bike-specific sub harness, so the small DN tachometer (orange LED) can be installed on the Daks 125 (JB04) without the need to modify the stock parts or wiring.
The wiring can be connected by coupler.
The meter mounting position is to the left of the stock meter.
■Φ48 small DN tachometer DN=digital needle
The angle of the pointer is completely controlled by digital signals and a small motor, resulting in high pointer retention and excellent reliability.
In addition to the RPM function, the meter is equipped with a thermometer, a clock, an engine work timer, and an automatic measurement function (maximum temperature record / maximum RPM record).
The black panel with white LED lighting provides excellent nighttime visibility.
≪Φ48 small DN tachometer details>>
■The monitor is equipped with a variety of functions (digital display)
A thermometer (capable of measuring up to 120°C) stick temperature sensor is included, so the temperature sensor can be placed inside the cowl to measure outside air temperature.
Also, by attaching a drain bolt (M12 x P1.5) with magnet (sold separately) made by SP Takegawa, temperature at the drain bolt can be measured.
■Automatic measurement function
The maximum temperature record and the maximum rpm record are done automatically when the meter is installed.
After running, you can check the record by switching the meter display, and the record will be saved until resetting.
■Engine Work Timer
Timer that automatically adds up the engine operating time above 500rpm.
It stops when the speed drops below 500rpm.
Maximum time: 9999 hours (up to 100 hours is recorded in minutes, and over 100 hours is recorded in hours.Resettable.With hide setting)
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
There are no Customer Review yet.
New Custom Articles
