![POWER COMMANDER V [1020-2889]](http://global-fs.webike-cdn.net/catalogue/images/81831/DFC90CF6-E290-46FC-ADD9-6D3EBF58B090.jpg "POWER COMMANDER V [1020-2889]")
![POWER COMMANDER V [1020-2889]](http://global-fs.webike-cdn.net/catalogue/images/81831/DFC90CF6-E290-46FC-ADD9-6D3EBF58B090_s.jpg "POWER COMMANDER V [1020-2889]")
601.87 USD (89,412 JPY)
Delivery Information
This item is discontinued.
Product detail
Base Color: Black, Red
Color / Finish: Black, Red
Feature: USB Powered
Model: Power Commander V
Oxygen Loop Control: Open Loop
Physical Connection: Plug-In (OEM Style Connectors)
Product Name:Fuel Injection Module
Programming: Pre-Programmed, Programmable
Riding Style: street
Units: Each
**There may be changes in product specifications due to the manufacturer's reasons.
*The instruction manual is in English.
*Delivery may be delayed due to importing.
*QEM is not necessary if using the SFM.
.
* The image is only for reference. The image shown may differ from the actual product.
・Fuel control for each individual cylinder in a smaller enclosure
・Warm-up" fuel adjustment (unit reads engine temp and allows fuel / timing adjustments based on the reading)
・Reduced size from the PCIII USB
・Easy to install
・USB powered from computer; 9 volt adapter is no longer needed
・Two-position map-switching function built in
・It can add any Single Pole Single Throw (SPST) switch and toggle between two different fuel maps
・Gear / speed input allows for map adjustment based on gear
・Analog input allows user to install any 0-5 volt sensor
・Build an adjustment table based on analog input such as boost or temperature
・Power Commander V is capable of allowing each cylinder to be mapped individually and for each gear with the gear position input connected
・More tuning ranges than PCIII USB
・Enhanced "accel pump" utility
・For Offroad and ATV, see appropriate catalog under Moose Power Commanders
・Made in the U.S.A.
SECONDARY FUEL MODULE
・The "basic" mode allows you to have a single fuel table that simply puts the requested fuel change in both upper and lower injector modules at the same time
・Allows for the adjustment of all eight-injectors
・Allows for the use of the Dynojet Quick Shifter sensor on eight-injector bikes which provides added fuel control and shifter functionality
・You can also map each injector separately, giving you up to 48 complete maps
・Adjusts both upper and lower injectors by as much as +250 / -100%
・If gear position input is connected to your PCV, you can adjust all of the injectors on a "per gear" basis.
・Single cable connection to the PCV
・The "basic "mode is the perfect setting for modified engines that require more fuel than four-injectors can provide, but do not need the the complexity of mapping each cylinder and each gear separately
・Connects to the upper injector rail using OEM connectors
・See application chart for availability
QUICK SHIFTER EXPANSION MODULE
・The QEM allows the Dynojet Quick Shifter sensor to be used with Power Commander V on bikes that have eight injectors
・Once the sensor is attached you will have full Quick Shifter functionality
・The QEM connects to the upper injectors and then into the PCV
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
There are no Customer Review yet.
New Custom Articles
![POWER COMMANDER V [1020-2889]](http://global-fs.webike-cdn.net/catalogue/images/81831/DFC90CF6-E290-46FC-ADD9-6D3EBF58B090_TL.jpg "POWER COMMANDER V [1020-2889]")